Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  OMC Jet 115-HP Cylinder Head Removal

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   OMC Jet 115-HP Cylinder Head Removal
archie posted 08-19-2008 01:42 PM ET (US)   Profile for archie   Send Email to archie  
How hard to remove are the cylinder heads on the 115 hp OMC JET engine [as used in the some models of the Boston Whaler RAGE boat]?
Tohsgib posted 08-20-2008 11:20 AM ET (US)     Profile for Tohsgib  Send Email to Tohsgib     
With 3 bolts, exhaust tubing, and a few wires you can remove the engine. I highly suggest this if you are going to be working on it.
archie posted 08-20-2008 11:34 AM ET (US)     Profile for archie  Send Email to archie     
Good advice. I didn't realize it was that simple.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.