Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  relay wire lay out

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   relay wire lay out
CaptKMK posted 03-21-2009 01:18 PM ET (US)   Profile for CaptKMK   Send Email to CaptKMK  
This is a good one, I had to unscrew my panel for lights, Blower, on my 1994, 14' rage and some connectors fell off and I tried to put them back but with little luck.It's my running lights that don't work but my anchor light does.
I have replaced the light bulbs but still no light forward or aft!
Could my relay be partly gone on the running light switch?
I also have researched but to no avail a diagram lay out of the wire hook up for the relay.

Please send help


sincerely, captkmk

CaptKMK posted 03-21-2009 05:36 PM ET (US)     Profile for CaptKMK  Send Email to CaptKMK     
Found my answer by moving some wires around.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.