Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  205 Conquest, adding hydraulic steering fluid

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   205 Conquest, adding hydraulic steering fluid
Robert V posted 08-18-2009 08:31 AM ET (US)   Profile for Robert V   Send Email to Robert V  
Can anyone tell me how to top-off the hydraulic helm unit on a 205 Conquest with the 150 Verado? I unscrewed the cap and I do not see any fluid....just picked it up from the dealer. I read the manual from UFLEX and the instructions seemed to be for purging the system, not adding fluid. Also, what is the proper fluid level? Should I see fluid in the helm station steering hub? I am left scratching my head on this one, hopefully someone else has some experience to share....

Robert V

Bella con23 posted 08-18-2009 04:06 PM ET (US)     Profile for Bella con23  Send Email to Bella con23     
http://ww2.seastarsteering.com/PDFs/343322A.pdf
Bottom of the document explains the proper filling instructions. Worked for me.
Joe
Robert V posted 08-18-2009 07:44 PM ET (US)     Profile for Robert V  Send Email to Robert V     
Thanks Joe, that is exactly what I needed to know. I really appreciate the help. I checked the level with the motor in the neutral/straight position, maybe the fluid level isn't low after all.

Robert

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.