Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  Montauk water pressure guage "fixed" itself

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Montauk water pressure guage "fixed" itself
sapple posted 09-16-2009 07:11 PM ET (US)   Profile for sapple   Send Email to sapple  
I was reading with great interest the posts about water pressure guages not working on late model Montauks. Shortly after reading those posts mine stopped working. However, last weekend when I went out it was working again, and seemed to be performing better than ever.

I assume this is a good thing. Any speculation on what happened?

Marsh posted 09-17-2009 08:48 PM ET (US)     Profile for Marsh  Send Email to Marsh     
Mine does the same thing. My theory is that it gets internally clogged, then unclogged at random times. My pressure gauge stayed clogged for an entire year, then mysteriously started working one day this past spring. Has worked fine ever since.


fishinchips posted 09-20-2009 01:39 PM ET (US)     Profile for fishinchips  Send Email to fishinchips     
I do know that the connection where the hose attaches to the motor can get plugged up at times.
I always run in salt and flush out after every use. It still clogs up once in a while.
A couple of trips ago, my psi guage did not work. I suspected it got clogged again by sea salt. Just didn't have enough time to unclog it. Next trip out, it unclogged itself.

Ken (170 montauk / 22 hydrasports wa vector)

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.