Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  Install Photos of Amphibian A6 Underwater Light

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Install Photos of Amphibian A6 Underwater Light
TRAFFICLAWYER posted 11-05-2009 05:59 PM ET (US)   Profile for TRAFFICLAWYER  
The transom is pretty thick on my 255 Conquest, at least 3", next step will be wiring to my auxiliary switch.

RevengeFamily posted 11-05-2009 08:21 PM ET (US)     Profile for RevengeFamily  Send Email to RevengeFamily     
I see you opted for the rear exiting wire. Are you using 5200 to seal around the wire?

I went to their web site and took a look at their LED lights, pretty cool looking. You are installing only one?

Do these lights attract fish or are they just for effect?


TRAFFICLAWYER posted 11-05-2009 08:28 PM ET (US)     Profile for TRAFFICLAWYER    
Just for effect, used 4200 mainly, some 5200 around the edge.
Only one, boats already pimped to the hilt.
K Albus posted 11-05-2009 09:22 PM ET (US)     Profile for K Albus  Send Email to K Albus

Feejer posted 11-06-2009 07:29 AM ET (US)     Profile for Feejer  Send Email to Feejer     
They look good, only one?

The green lights on my boat attract a HUGE amount of baitfish. No more casting net, I turn the lights on and within 5 minutes their are hundreds waiting to be scooped up

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.