Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  Bow rail for 2002 Dauntless

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Bow rail for 2002 Dauntless
morrisericd posted 03-25-2010 12:54 PM ET (US)   Profile for morrisericd   Send Email to morrisericd  
I know it's been discussed here before but I haven't had any luck with the information I've found. Seabrite out of Florida is out of business. The guy at CMI Marine in Massachusetts said that he has the patterns/measurements for most of the older Whalers but not the Dauntless. Apparently, when Seabrite went out of business, they took the plans/measurements with them. He even said Whaler tried to convince them (Seabrite) to give him the drawings, but they just disappeared. CMI said they could make me a bow rail if I had the measurements and angles of an existing bow rail. Any ideas where I could find this information? No one in my area has a 18' Dauntless from that era, so I can't get them myself. There must be a published drawing somewhere showing what I need.
Thanks
Robert V posted 03-26-2010 05:55 AM ET (US)     Profile for Robert V  Send Email to Robert V     
Your best bet would be to call Chuck Bennett at Boston Whaler. You can find the customer service email on the Whaler site or you can use the toll free number on the website. Best of luck with your project,

Robert

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.