CONTINUOUSWAVE

Wanted to buy: Bow and side railings for an OUTRAGE 20.

I am located in Delaware and can be reached @ 302-344-89Eighty Eight

Thanks for the advice and recommendations. The TotalBoat hue "Oyster" still appears to be the best match [to the original gel coat color]. I will get other chips from AWLGRIP to insure i have best fit. I want to paint once and properly, but I also want to get the best match, as i will NOT ...

I just received color chips from TotalBoat. Oyster White is the closest match.

[H]ello all. [M]y son and [I] are in the process of rebuilding his [1981--always use four digits for years] 17-footer. A prior owner painted the upper part of the gunwales deep flag blue. We stripped the paint and sanded down [the gunwales] to almost bare gel coat. We are not going for original and ...

Is $350 [a fair price for] a used Reversible Pilot Seat whose cushions need to be redone?

[I am] finally coming to my senses. [I am] planning on pulling the trim-tilt unit—if i can get the bolts out and [I am ] confident it will very difficult. [I] will need every tool in my garage to get off the bracket. [It is] the best course of action i found used trim-tilt assemblies for under $300 ...

Q1: has a 17-foot classic hull ever been powered by a115-HP engine with a 25-inch shaft? Q2: if, so was the 115-HP engine mounted high? Q3: was it mounted with a bracket? BACKSTORY: my son’s 17-footer has a Johnson 90-HP engine that is fighting us. The power tilt-trim is not working. The prior owner...

Hi biggie. Thanks for insight On this 1981 SPORT 17 many changes have occurred over the last 39 years. This one has a much newer CC and pedestal seats. There are many screw holes for the benches, but no wood to be found with our purchase. I just got a center console. Thanks to WhalerRon, I have RPS ...

I am interested. My son just bought a 17 Montauk.
[Please contact the seller directly to inform the seller you want to buy the item--jimh]

i just picked up a [1981] SPORT 17 that has one pedestal seat. I would like to replace that with a reversible pilot seat or RPS. I see mentions of plans to build a RPS seat, but cant seem to put my finger on the plans themselves. Give me a link to plans for building a reversible pilot seat that will...

[I] have a [1989] Outrage 22 with a [2001] Yamaha 200 HPDI. The propeller is dinged up. I want to replace it. The current propeller is a three-blade stainless steel 19. Is this the best propeller? Does changing to a four-blade make sense? My 270 OUTRAGE had twin Mercury 225-HP engines with four-blad...

I recently sold my 2006 270 with Merc 225 opti’s, which was able to hit 58mph trimmed up at 5800 rpm without any problems, full load 4 adults. OptiMax engines are 125-lbs lighter than the VERADO, but she ran great.

In the past I used GOOF OFF to clean the lettering, a product called SHUTTER SAVER to restore the color, then a nice polish to protect them. They still look great four years later.

I would like to add a swim ladder and possibly a 10-inch engine bracket to my 1989 OUTRAGE 22. I am concerned about lack of space as I have 12-inch trim tabs that are close to the engine and don’t offer much space for swim ladder. Can I get some pictures to show how boats have mounted a swim ladder ...

This may work for you [dead link removed].

[T]he transom does not show any signs of twins, but [I] would love to have a couple on the back--if [I] can ever afford them. I have a friend who may [have] an Armstrong bracket, but for only a single; that would be great on the back, but will also require money to close off the transom. Lots of dre...

Thanks for the information. The boat has a Yamaha 200 HPDI two-cycle engine.

Does the capacity jump to 129-gallons from 77-gallons? Hell, I can hit the Flemish Cap with that much fuel[!]

Sorry about the PDF--still learning.

i just purchased a 1989 Outrage 22. In researching the boat, [I] noticed a majority of 22-footers have the aft bait well behind the in-deck fuel tank. On my 1989 OUTRAGE 22, it doesn't have the live well, and, in fact, it's all fuel tank from the console to the aft well. Is the fuel tank [on this OU...

email sent this morning....

thanks for the information..... for ABS, i meant PVC vinyl trim board crap from Home Depot, ie, not real wood. Does not look like i will find replacements, so i will try to form some via African Mahogony or teak if i can find a reasonable source. Can anyone (please) with a 1989 Outrage 22' take some...

[The author is considering purchase of a 1989 Boston Whaler OUTRAGE 22 but does not like its non-teak gunwale caps. However, he expresses concern about the cost of teak replacement caps.] Where can I pick-up a pair [of teak] gunwale caps for a 1989 Boston Whaler OUTRAGE 22? Who makes 'em? Steer me t...