CONTINUOUSWAVE

Hi all. Give me input on a potential boat purchase on the boat's potential performance. The boat s 2001 CONQUEST 26 (also known as 275 in later years) with 2005 Yamaha twin F225 engine. Would you anticipate this power to be sufficient for this hull under load? Thank you for your input. Some other ob...

Looking for Boston Whaler 26/275 CONQUEST with or without motors, with or without trailer. West coast preferred. Looking to acquire as late as winter/early spring 2021 if needed.

Contact me at 300tenthave@gmail.com

I am considering buying a 275 or 26 Conquest. I would be grateful for input on these models. These two models are basically the same boat just different production years.

Any conquest 26 or 275 owners/riders out there that can comment on the ride quality ?

Or any 305 owners out there that care to comment?

I’ve ruled out the early years 28/295. Strange hull design.

Very helpful. Thank you.

To add more potential confusion, does the Conquest 26/275 share these head-sea-pounding qualities of the 28?

And does the 305 as well? Thank you all.

After doing some research into the subject early 2000s Yamaha 200, known engine exhaust corrosion is driving me away from the potential purchase. However I’m now wondering how to reconcile the two responses to my question in this thread- if Whaler says 610-lbs total weight is the target, I suppose I...

Hi all, I currently have [a 1987--please always use four digits to indicate a year] Revenge 20 Walk-Through with a [1998] Mercury Offshore 200 main engine and an 8-HP auxiliary engine using four-stroke-power-cycle design. The combined weight of these two engine is about 480-lbs. I may get an an olde...

Hi all. I am trying to figure out the various hull versions of the Conquest 28-feet models. Here’s what I’ve been able to deduce: By all accounts the early 2000’s 280 CONQUEST hulls are hard riding in any kind of chop. [SPECULATES] The hull was redesigned in 2007 with a deeper V-hull, and the ride w...

I have a 1987 REVENGE 20 W/T. I need a replacement cushion (not necessarily OEM) for the OEM captain's seat, pictured below:


Who or where is a source for a replacement cushion?

Who made this seat?

What is the model designator?

Thank you.

Thank you. I believe a number of folks decided to make replacement extension pieces (including JimH) To extend the v berth as well since that porta potty piece doesn't even come close to filling it in.

Hi all. I'm making a filler piece for my 1987 REVENGE 20 W-T. I am going to use a thick piece of plywood--but open to suggestions.

How did you all design your so that it dealt with the "lip" on the hatches? Did you do a cutout for that or something?

Thank you for your input.

Is there a wood [locating] diagram available for the REVENGE 20 W-T?

Does anyone have a picture of the original factory option of pilot seat / workstation that was available on this boat? I am interested in something similar for my 20 revenge.