Search found 25 matches

by Will
Wed Jul 19, 2023 10:22 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 Outrage 19 Navigation Lamp Restoration
Replies: 6
Views: 2250

Re: 1991 Outrage 19 Navigation Lamp Restoration

combinedSideligthLampNoChocks.jpg
Fig. 2. The combined sidelight lamp that is the topic of this discussion is revealed now in this photograph.
combinedSideligthLampNoChocks.jpg (20.19 KiB) Viewed 1700 times
by Will
Tue Jul 18, 2023 8:05 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 Outrage 19 Navigation Lamp Restoration
Replies: 6
Views: 2250

1991 Outrage 19 Navigation Lamp Restoration

[Started a second thread on same topic. The two threads have been merged.] On my 1991 OUTRAGE 19 the [sidelights lamp (or lamps) and white all-round lamp] are not illuminating. The cause of this problem appears to be with the internal lightbulb housing [socket] and the way the [lightbulb] is held in...
by Will
Mon Jun 12, 2023 10:36 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 Outrage 19 Navigation Lamp Restoration
Replies: 6
Views: 2250

Source for OEM Replacement Combined Sidelight Navigation Lamp

Q1: what is a source for an OEM combined sidelights navigation lamp mounted at the bow of my 1991 19 Outrage? Q2: is the PERKO lamp seen below an exact fit or close-to-exact fit? https://www.perko.com/images/catalog/product/xl/Fig%200972.jpg Source: https://www.perko.com/catalog/navigation_lights_un...
by Will
Fri May 26, 2023 10:30 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 OUTRAGE 18 Stern Seat Repair
Replies: 3
Views: 1745

Re: 1991 OUTRAGE 18 Stern Seat Repair

Thank you Phil. I did not know it was non-structural so thank you for that.

Q2: will 3/4-inch marine grade plywood suffice?

Q3: should multiple coats of epoxy via brush be applied?

The plywood as it came did not last very long.
by Will
Fri May 26, 2023 9:42 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 OUTRAGE 18 Stern Seat Repair
Replies: 3
Views: 1745

1991 OUTRAGE 18 Stern Seat Repair

I need to rebuild and reupholster the aftermarket rear seat for my 1991 Outrage 18. This seat has plywood as a base. I am considering using a PVC or PVC-type material for the rebuild. Q1: what thickness of PVC-type material would be appropriate to use for the seat base on an aftermarket rear seat fo...
by Will
Wed Apr 14, 2021 10:17 am
Forum: REPAIRS and MODIFICATIONS
Topic: Rub Rail Repair
Replies: 2
Views: 4364

Rub Rail Repair

I need a short section of rub rail to repair the rear corners of my 1991 19 Outrage—my kids are hell on those corners.

What is viable substitute?

What is a method of repair?

I have the black insert but the hard white piece that is riveted to the boat is missing.

—Will
by Will
Mon Sep 28, 2020 2:03 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 OUTRAGE 19 Rub Rail and Rear Bench Seat
Replies: 6
Views: 2456

Re: Rub Rail and Rear Bench Seat Questions

I agree. I took out the RPS and stern bench and put in a lean post several years ago. I prefer to stand and love the room. However, wife and daughter (and dog) miss having comfortable places to sit in the stern.
by Will
Mon Sep 28, 2020 12:20 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 OUTRAGE 19 Rub Rail and Rear Bench Seat
Replies: 6
Views: 2456

Re: Rub Rail and Rear Bench Seat Questions

Thank You Yes, the legs are corroded. Q5: Is there any way the steel can be stripped and possibly powder coated? Q6: If so, what type of company does that work? [In the seat that is believed to be a Specialty Marine seat] the wood is rotten and the upholstery is in bad shape. My thought is to rebuil...
by Will
Mon Sep 28, 2020 10:43 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 OUTRAGE 19 Rub Rail and Rear Bench Seat
Replies: 6
Views: 2456

1991 OUTRAGE 19 Rub Rail and Rear Bench Seat

I am in the process of updating my 1991 19 Outrage. I have reached out to Barbour Plastics about the availability of a rub rail, I see Specialty Marine offers them as well. Tell me your experience with the Specialty Marine rub rail. I have a rear bench seat that I believe came from Specialty Marine....
by Will
Tue Sep 08, 2020 11:19 am
Forum: REPAIRS and MODIFICATIONS
Topic: RPS Seat Height
Replies: 3
Views: 1843

Re: RPS Seat Height

Thank you Jim as always. Spouter is a beautiful boat.

Will
by Will
Tue Sep 08, 2020 9:56 am
Forum: REPAIRS and MODIFICATIONS
Topic: RPS Seat Height
Replies: 3
Views: 1843

RPS Seat Height

I removed the RPS from my 1991 19 Outrage several years ago in favor of a leaning post. Now I am going to put the RPS back in. I am 6-feet and my wife is 5-feet 7-inches in height. I want to raise the height of the RPS to better see over the console when sitting and use it as a leaning post when sta...
by Will
Fri Mar 06, 2020 9:14 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 19 Outrage Gel Coat
Replies: 4
Views: 2121

Re: 1991 19 Outrage Gel Coat

Boston Whaler Customer Service responded to my inquiry almost instantly and good for them. The gel coat resin hue is Spectrum Gelcoat color code #2203. ASIDE: Brian, I am removing the trim tabs from my boat. They were on it when I bought the boat and stopped working several years ago. I am not sure ...
by Will
Thu Mar 05, 2020 2:44 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 19 Outrage Gel Coat
Replies: 4
Views: 2121

Re: 1991 19 Outrage gelcoat question.

Thank You.
by Will
Thu Mar 05, 2020 1:38 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 19 Outrage Gel Coat
Replies: 4
Views: 2121

1991 19 Outrage Gel Coat

I am going to remove the old, no longer working, trim tabs off of my Whaler and will need to repair the holes that will be left. Please tell me what color gelcoat I will need and where I can get it. I have heard the color of the boat described as "desert tan" and "almond". It is ...
by Will
Mon Dec 30, 2019 10:35 am
Forum: SMALL BOAT ELECTRICAL
Topic: Yamaha Fuel Gauge Diagnosis
Replies: 3
Views: 6080

Yamaha Fuel Gauge Diagnosis

[This topic is moved to SMALL BOAT ELECTRICAL for discussion--jimh] I have a 2010 Yamaha F150, 2010 Yamaha gauges, and a 2010 Florida Marine Tank in my 1991 Boston Whaler Outrage 19. The fuel gauge is flashing one bar. I disconnected the sending unit wires yesterday and I am still getting one flashi...
by Will
Wed May 29, 2019 9:47 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 19 Outrage - Source for dash on console
Replies: 3
Views: 5067

1991 19 Outrage - Source for dash on console

I am not sure what this item is called so please forgive me. I would like to replace the black square on the dash of my console. It is what the gauges and steering wheel are mounted in. It is OEM and very faded. Is there a source for replacing it?

Thank You - WIll
by Will
Wed May 29, 2019 9:36 am
Forum: REPAIRS and MODIFICATIONS
Topic: Steering Questions - 1991 19 Outrage
Replies: 0
Views: 12440

Steering Questions - 1991 19 Outrage

The boat: 1991 19 Outrage. 2010 150 hp fs Yamaha. Steering equipment is all original. The scenario: My 18 year old son and two of his friends are spending 10 days going from Chesapeake, Va to Charleston, SC on the boat. On Saturday, a few miles north of Isle of Palms, SC, one of the steering hydraul...
by Will
Thu Apr 11, 2019 2:30 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Source for Bimini Top
Replies: 11
Views: 9243

Re: Source for Bimini Top

Thank you for the replies. The boat length is 19. The canvas is in remarkably good condition considering its age. I have searched extensively but cannot find a top that mounts to the boat the way the one I have does. The easiest thing to do is to have a new frame made and I found a company in Deltav...
by Will
Mon Apr 08, 2019 3:36 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Source for Bimini Top
Replies: 11
Views: 9243

Re: Source for Bimini Top

Thank you for the replies. I contacted Mills and would prefer not to spend that much on a top. Additionally, I need the frame and top, not just the canvas redone. Thank You
by Will
Mon Apr 08, 2019 1:10 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Source for Bimini Top
Replies: 11
Views: 9243

Source for Bimini Top

The OEM top on my 1991 Outrage needs to be replaced. I do not use it frequently but it is nice to have when I need it. Is there a source for tops that the continuouswave community has found to be of good quality and reasonably priced?

Thank You - Will
by Will
Thu Jul 05, 2018 10:07 am
Forum: MARKETPLACE
Topic: WTB: Bimini Top 1991 19 Outrage
Replies: 1
Views: 1937

WTB: Bimini Top 1991 19 Outrage

All, the bimini top frame on my boat snapped this week and I need to replace it. It is 6' by 5' and is attached to a 4' track. I have reached out to Mills but am wondering if there are other companies that I should consider, possibly a local manufacturer. I am in Baltimore but am frequently in Richm...
by Will
Fri Nov 17, 2017 1:59 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 19 Outrage Front Lifting Eye
Replies: 5
Views: 3849

Re: 1991 19 Outrage Front Lifting Eye

Thank You All
by Will
Fri Nov 17, 2017 11:34 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 19 Outrage Front Lifting Eye
Replies: 5
Views: 3849

1991 19 Outrage Front Lifting Eye

A friend just noticed that the attachment point, where the trailer clips to the front of the boat, is rusted through at the bolt. I am not near the boat as I type this. Is that piece through-hulled to the lifting eye on the other side? If so, can I buy replacement pieces to fix it and if so, how dif...