CONTINUOUSWAVE

To clarify - my objective is to confirm that the installation of the plug cap onto the new ignition coil wire has been made correctly and that the current from the coil can in fact reach the plug. I should probably have said "continuity check" not resistance, although one could argue that ...

Thank you Jim. Yamaha 90hp, Engine Model 90AETOL, Year of Manufacture 2019 Re Q1: Is there a specific procedure or "trick" to replacing the plug cap onto the coil wire when installing a new ignition coil on a Yamaha 90-HP engine To answer this question, you need have the actual experience ...

Q1: Is there a specific procedure or "trick" to replacing the plug cap onto the coil wire when installing a new ignition coil on a Yamaha 90-HP engine that is three years old? Q2: once the ignition coil is assembled, how is a resistance test made to insure there is proper electrical connec...

BACKSTORY: I have a 1969 Nauset 16 with a 2018 Yamaha 90. Unfortunately , the NAUSET 16 was damaged during Hurricane Humberto--I am Bermuda based--when another boat broke free and took a large section out of the bow. There is quite a lot of damage to the NAUSET 16 along one of the chines where glass...

Thanks for the input all. I pulled the trigger on getting the Yamaha, the dealer came back with a very good offer including a trade in of 11% of the price ( on a 17 year old engine) and throwing in the 704 binnacle control ( @ $450) that I would have needed. For what I use the boat for, it's the bes...

I did search the forums for this topic, but given that Yamaha 90 [two-stroke-power-cycle] engines are not available anymore in the USA, there is less current chatter on this exact question. Here is my situation, and I would appreciate any succinct comments and input to assist in the decision making ...