Search found 20 matches
- Thu Apr 06, 2023 6:27 am
- Forum: The GAM
- Topic: 1974 Outrage 21 Hull Stencil Number
- Replies: 1
- Views: 2147
1974 Outrage 21 Hull Stencil Number
Q1: what do the numbers 001284 [in the hull stencil number secondary location in a 1974 OUTRAGE 21 boat] seen in Figure 1 represent?
These numbers are on the [inside of the] starboard [seat locker on the foredeck].
- Thu Apr 06, 2023 6:15 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Outrage 21 Restoration
- Replies: 16
- Views: 2934
Re: 1974 Outrage 21 Restoration
Q8: [For sealing the gap between the fixed deck and removable deck] would butyl tape 1/2-inch x 1/4-inch work?
- Tue Apr 04, 2023 7:31 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Outrage 21 Restoration
- Replies: 16
- Views: 2934
Re: 1974 Outrage 21 Restoration
Q6: what is the proper sealant is to create a watertight enclosure?
- Sat Feb 04, 2023 5:39 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Outrage 21 Restoration
- Replies: 16
- Views: 2934
- Sat Feb 04, 2023 5:16 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Outrage 21 Restoration
- Replies: 16
- Views: 2934
Re: 1974 Outrage 21 Restoration
Now it was time to pull the boat out of the shop and flip it over using a boom Crane. Went well and now starting the long progress of glassing the top side. All the curves and bumps required vacuum bagging the cloth in sections. This worked very well and will require VERY little fairing to be ready ...
- Sat Feb 04, 2023 5:03 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Outrage 21 Restoration
- Replies: 16
- Views: 2934
Re: 1974 Outrage 21 Restoration
Next was to level the boat correctly to shoot the laser waterline for bottom paint. Then taped off and had to sand the perfect paintjob with 120 grit to create the "Tooth for the bottom paint". Simply rolled on with a pencil roller. Total of 2 coats
- Sat Feb 04, 2023 4:56 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Outrage 21 Restoration
- Replies: 16
- Views: 2934
Re: 1974 Outrage 21 Restoration
Time for AlexSeal's "Artic White" topcoat. A total of two (2) coats were applied at 3-4 mils each coat. Super happy with the results with only one small run I will deal with at a later date.
- Sat Feb 04, 2023 4:50 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Outrage 21 Restoration
- Replies: 16
- Views: 2934
Re: 1974 Outrage 21 Restoration
Time to post an update on progress. The 2nd coat of high build was applied and sanded to 240grit. Then the Finish Primer applied and sanded to 400 grit.
- Thu Dec 22, 2022 9:48 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Outrage 21 Restoration
- Replies: 16
- Views: 2934
Re: 1974 Outrage 21 Restoration
Q1: when the new cloth was laminated over the hull, did you apply all the cloth and epoxy resin in one session? I applied the biaxial cloth in sessions. I cut the cloth 24" wide and half the width of the hull. Laid out cloth on plastic on a work surface and wetted out cloth with epoxy resin. I...
- Wed Dec 21, 2022 10:20 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Outrage 21 Restoration
- Replies: 16
- Views: 2934
Re: 1974 Outrage 21 Restoration
Figure 4 shows more fairing with ALEXSEAL brand two-part fairing compound. fig4.jpg After sanding and fairing, 12-ounce bi-axial cloth [wetted] with Hawk epoxy was applied over the entire hull. fig5.jpg After the new laminate layer was cured, the surface of the hull was lightly sanded. Next, the ent...
- Wed Dec 21, 2022 10:08 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Outrage 21 Restoration
- Replies: 16
- Views: 2934
1974 Outrage 21 Restoration
The restoration of my 1974 OUTRAGE 21 boat is my third Boston Whaler boat restoration. The first and second restored Boston Whaler boats were both 16-foot hulls. I have learned a lot from my mistakes, and I do not plan to repeat them this time around. After the 1974 OUTRAGE 21 boat was stripped of a...
- Thu Nov 24, 2022 9:23 am
- Forum: MARKETPLACE
- Topic: 1974 OUTRAGE Console $50 in Maine
- Replies: 0
- Views: 4787
1974 OUTRAGE Console $50 in Maine
For sale: 1974 Outrage center console for $50 in Cumberland, Maine.
CONTACT: 207 831 1582
The console needs a lot of love but someone handy can salvage it. I just can't throw it out.
CONTACT: 207 831 1582
The console needs a lot of love but someone handy can salvage it. I just can't throw it out.
- Sat May 07, 2022 9:22 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 OUTRAGE 21 Bow Rail Fittings
- Replies: 2
- Views: 698
Re: 1974 OUTRAGE 21 Bow Rail Fittings
I have heard Captain Jim's Marine Salvage is closing.
I have found a place to get the bow railing fittings re-chromed in Connecticut--off they go.
Thanks--Steve in Maine
I have found a place to get the bow railing fittings re-chromed in Connecticut--off they go.
Thanks--Steve in Maine
- Sat May 07, 2022 9:16 am
- Forum: MARKETPLACE
- Topic: FS: 1974 RPS: $100 in Maine
- Replies: 2
- Views: 2050
FS: 1974 RPS: $100 in Maine
For-sale: an OEM reversible pilot seat from a 1974 Outage for $100 in Cumberland, Maine. CONTACT sever124@yahoo.com RPS.jpeg This RPS is "all there" and needs some love. The seat cushion as a small tear. The wood needs to be stripped and refinished; there is no rot. The legs were painted w...
- Thu Apr 28, 2022 1:29 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 OUTRAGE 21 Bow Rail Fittings
- Replies: 2
- Views: 698
1974 OUTRAGE 21 Bow Rail Fittings
Where can the angled upright bow rail stanchion fittings for a 1974 OUTRAGE 21 be purchased? [Deleted sidebar question on another topic based on further comments from the OP; also deleted all replies on the sidebar topic.--Moderator] BACK STORY I have started work on my 1974 Outrage 21. I have strip...
- Sat Apr 09, 2022 8:08 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 OUTRAGE: Identify Bolts in Motor Well; Adhesive Used to Join Hull Sections
- Replies: 10
- Views: 1708
Re: 1974 OUTRAGE: Identify Bolts in Motor Well; Adhesive Used to Join Hull Sections
Figure 3 shows a bolt in the [floor] of the engine splash well. I can reach down and feel a bracket inside, which may be a superstructure hold down during bonding.
- Sat Mar 19, 2022 10:10 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 OUTRAGE: Identify Bolts in Motor Well; Adhesive Used to Join Hull Sections
- Replies: 10
- Views: 1708
- Sat Mar 19, 2022 10:01 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 OUTRAGE: Identify Bolts in Motor Well; Adhesive Used to Join Hull Sections
- Replies: 10
- Views: 1708
Re: 1974 OUTRAGE: Identify Bolts in Motor Well; Adhesive Used to Join Hull Sections
Butch, You have a valid point but the 1972 through 1981 OUTRAGE hulls were different than the 13, 16, and 19-foot boats. The 21 had a superstructure design that riveted to the Main Hull. All the flotation foam was below the cockpit sole. Once the superstructure is removed and the [removable deck sec...
- Thu Mar 17, 2022 4:56 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 OUTRAGE: Identify Bolts in Motor Well; Adhesive Used to Join Hull Sections
- Replies: 10
- Views: 1708
Re: 1974 OUTRAGE: Identify Bolts in Motor Well; Adhesive Used to Join Hull Sections
Thanks for the reply from everyone. Yep, I'm stupid. Its a 1974 21' outrage. I felt the upper Superstructure was riveted in place but not sure. Yes, it is coming off and going back on after being worked over and epoxy painted. The bolts are still a mystery to me but hope to be able to look back when...
- Tue Mar 15, 2022 10:39 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 OUTRAGE: Identify Bolts in Motor Well; Adhesive Used to Join Hull Sections
- Replies: 10
- Views: 1708
1974 OUTRAGE: Identify Bolts in Motor Well; Adhesive Used to Join Hull Sections
On my recently purchased 1974 Outrage in the bottom of the engine splash well there are two stainless stainless bolts pointing straight downward. Q1: are these bolts part of the engine mounting? Q2: what is the purpose of these bolts? I have removed the rub rail. I plan to separate the upper deck fr...