Search found 1592 matches
- Thu Jan 12, 2023 10:33 am
- Forum: The GAM
- Topic: Hidden VIN on E-Z-LOADER Trailer
- Replies: 7
- Views: 4154
Re: Hidden VIN on EZ Loader trailer
Post the information. The decal on our previous EZ Loader was deteriorating after ten years. When selling the trailer the information should be verifiable when compared with a bill of sale or registration document.
- Sun Jan 08, 2023 10:55 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: Bilge Pump Wiring
- Replies: 9
- Views: 4259
Re: Bilge Pump Wiring
The boat under discussion is stored in a boat lift which is very likely powered by AC power from the grid. A solar battery charger would seem an unnecessary expense when a standard AC powered battery maintainer could be used.
- Fri Jan 06, 2023 12:09 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: OUTRAGE 18 Using Through-Hull SONAR Transducer
- Replies: 7
- Views: 1892
Re: OUTRAGE 18 Using Through-Hull SONAR Transducer
Transom mounted transducer quality and relatively low cost cause me to wonder why you believe a through the hull transducer is worth the cost and effort to install. Transducers fail. The thought or replacing a through the hull transducer in your application when it inevitably fails seems daunting to...
- Thu Jan 05, 2023 11:01 am
- Forum: PERFORMANCE
- Topic: Re-powering TEMPTATION 2500 with Twin Engines
- Replies: 14
- Views: 4203
Re: Re-powering TEMPTATION 2500 with Twin Engines
In the Amazon my goal would be to go for reliability over any other factor. I assume your Temptation is not there.
- Wed Jan 04, 2023 12:44 pm
- Forum: PERFORMANCE
- Topic: Re-powering TEMPTATION 2500 with Twin Engines
- Replies: 14
- Views: 4203
Re: Re-powering TEMPTATION 2500 with Twin Engines
Professional fishing guides in the Gulf Shores and Orange Beach, Alabama area have been selecting Suzuki outboards for repower in preference of Yamaha outboards with more frequency than in previous years. I asked a guide what his reasoning was for replacing his Yamaha outboard with a Suzuki. He told...
- Tue Dec 27, 2022 10:12 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Classic 13-foot woodwork drawings available
- Replies: 8
- Views: 1455
Re: Classic 13-foot woodwork drawings available
Thank you for the post. Is there a trick to get the links to the drawings to work?
- Sat Dec 24, 2022 9:53 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Sources for Center Console and Reversible Pilot Seat
- Replies: 4
- Views: 1133
Re: Sources for Center Console and Reversible Pilot Seat
The prices quoted above seem extraordinarily high. Shipping to Norway will be expensive and there may be delays in customs. Shipping damage is another consideration. An alternative is to obtain construction drawings and check the costs to fabricate the parts from a local craftsman. An advantage woul...
- Sat Dec 24, 2022 9:42 am
- Forum: The GAM
- Topic: Source to Buy Lead
- Replies: 19
- Views: 3415
Re: Source to Buy Lead
For Prime members diving weight packages from Amazon are approximately four dollars a pound, delivered.
- Fri Dec 23, 2022 10:04 am
- Forum: The GAM
- Topic: Source to Buy Lead
- Replies: 19
- Views: 3415
Re: Source to Buy Lead
Lead is no longer used much by plumbers due to the widespread use of PEX tubing and pipe and fittings. Refrigeration systems continue to use lead based "silver solder" to connect swage joints in refrigerant tubing. If buying lead try buying locally as an online purchase would add high ship...
- Thu Dec 22, 2022 10:30 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Outrage 21 Restoration
- Replies: 16
- Views: 2768
Re: 1974 Outrage 21 Restoration
Thank you for posting. Very interesting.
- Fri Dec 16, 2022 9:52 am
- Forum: The GAM
- Topic: RAGE 13 Hull Design
- Replies: 10
- Views: 1737
Re: RAGE 13 Hull Design
Advise your wife that it is not rare for Boston Whaler boat owners to own more than one. A little psychology can be used. I found a nice used Sport 13 that would fit in any garage and bought it for my wife. She loves "her" little Whaler.
- Thu Dec 15, 2022 9:18 am
- Forum: The GAM
- Topic: RAGE 13 Hull Design
- Replies: 10
- Views: 1737
Re: RAGE 13 Hull Design
You're probably right [about the opinion you have formed that the DAUNTLESS 13=type hull is a better riding hull than the the original 13-foot Boston Whaler boat hull]. The 13-foot Boston Whaler original hulls are basically flat-bottom skiffs with a couple of strakes. Search the website for [article...
- Mon Dec 12, 2022 10:29 am
- Forum: The GAM
- Topic: Source to Buy Lead
- Replies: 19
- Views: 3415
Re: Source to Buy Lead
There are two obvious advantages to using lead ballast. First, lead has more weight in less bulk than other common metals. Second, lead is non-ferrous so corrosion is not a problem. Perhaps some existing weight in your boat can be relocated to eliminate the list. That could accomplish your goal with...
- Fri Dec 09, 2022 9:12 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mercury OptiMax Runs Poorly at High Engine Speeds
- Replies: 4
- Views: 998
Re: Mercury OptiMax Runs Poorly at High Engine Speeds
You may find installing a fuel system filter to be useful. The filter would be primary to any filters installed in the engine and would eliminate any need to service them. Another step you could take would be to flush the fuel tank to ensure any sand, water or other debris is not present. Finally, e...
- Thu Dec 01, 2022 9:45 am
- Forum: The GAM
- Topic: Bimini Top for Six-foot-two Helmsman
- Replies: 12
- Views: 3463
Re: Bimini Top for Six-foot-two Helmsman
If you intend to use a storage cover, highly recommended, for your boat having the bimini cover outside the bow rail will cause fit problems. Carver covers, also recommended, can be used while towing your boat if properly tied down. If towing your boat while covered is useful in your situation stori...
- Tue Nov 29, 2022 10:47 am
- Forum: The GAM
- Topic: Southbound Canadian Vessels
- Replies: 0
- Views: 2040
Southbound Canadian Vessels
For the past ten days we've seen several Canadian vessels heading to Florida's West Coast or beyond. It's fairly easy to spot northern vessels. They are the ones with weather curtains protecting the helms and cockpits and with a lot of equipment secured to boarding platforms and other available spac...
- Sat Nov 19, 2022 10:05 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: Mercury V10 Engine Offers Option for 48-Volt Alternator
- Replies: 1
- Views: 2310
Mercury V10 Engine Offers Option for 48-Volt Alternator
An article on PANBO and the several comments it elicited revealed an interesting point on the new Mercury V10 engines' alternators output. I believe it makes a 48-Volt output and eliminates the need for an auxiliary installed generator set on boats small enough to be powered by outboard engines. See...
- Sat Nov 19, 2022 9:24 am
- Forum: The GAM
- Topic: Mercury Ends the VERADO Supercharged Engine Era
- Replies: 2
- Views: 1275
Re: Mercury Ends the VERADO Supercharged Engine Era
Thanks for the Mercury update. [Moderator's note: comments about the new electrical system on the new Mercury V10 engine are moved to SMALL BOAT ELECTRICAL for discussion.]
- Mon Nov 14, 2022 9:15 am
- Forum: The GAM
- Topic: Boston Whaler SPORT 13 Bow Hatch Alternative
- Replies: 7
- Views: 1474
Re: Boston Whaler SPORT 13 Bow Hatch Alternative
Our Sport 13 is a 1981 model.
- Sat Nov 12, 2022 9:44 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Source for Rebuild Kit for Ritchie Compass
- Replies: 6
- Views: 1396
Re: Source for Rebuild Kit for Ritchie Compass
Check with Ritchie to see if they offer an overhaul or repair service. I believe the last Ritchie compass I bought came with a lifetime warranty.
- Fri Nov 11, 2022 10:30 am
- Forum: The GAM
- Topic: Boston Whaler SPORT 13 Bow Hatch Alternative
- Replies: 7
- Views: 1474
Re: Boston Whaler SPORT 13 Bow Hatch Alternative
Solid teak is the most attractive cover. Unfortunately the hatch cover on our 13 is plywood. I often remind myself to get a solid replacement but so far lacked sufficient motivation because the plywood does well. I don't know if it was part of the original design but our cover has a small pad eye mo...
- Sun Nov 06, 2022 9:37 am
- Forum: MARKETPLACE
- Topic: FS: 1973 16-foot bare hull, trailer for $2,200 in Georgia
- Replies: 2
- Views: 4431
Re: FS: 1973 16-foot bare hull, trailer for $2,200 in Georgia
ASIDE: the trailer alone is possibly worth the $2,200 asking price for the hull and trailer.
- Sat Nov 05, 2022 10:29 am
- Forum: The GAM
- Topic: Using Jet Ski Lift to Support SPORT 13
- Replies: 4
- Views: 1133
Re: Using Jet Ski Lift to Support SPORT 13
Before proceeding any farther with your plans I suggest you determine the actual weight of your SPORT 13 boat loaded with whatever you contemplate having aboard when you lift it. A truck stop scale will enable determining the weight. Don't neglect adding the boat cover weight and have the fuel tank ...
- Wed Nov 02, 2022 10:20 am
- Forum: The GAM
- Topic: Snowbird Boater Exodus Underway
- Replies: 3
- Views: 1099
Re: Snowbird Boater Exodus Underway
I should have mentioned that a fair proportion of the hailing ports seen on transiting vessels are Michigan based. I believe the Chicago River is the passageway for vessels from Lake Michigan to the Mississippi River. Yesterday we prepared our Sport 13 for an outing today. As of 7:00 this morning th...
- Tue Nov 01, 2022 11:34 am
- Forum: The GAM
- Topic: Snowbird Boater Exodus Underway
- Replies: 3
- Views: 1099
Snowbird Boater Exodus Underway
A great many yachts, large and small, are traveling down from the North via the Mississippi and Tennessee Rivers, the Tennessee-Tombigbee Waterway, the Tombigbee River, Alabama River and ICW on their way to Florida and Alabama Marinas for the Winter. Most of these "snowbirds" can be identi...
- Fri Oct 28, 2022 9:50 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Marine Tech Tool for Uflex Steering End Cap Removal
- Replies: 5
- Views: 1046
Re: Marine Tech Tool for Uflex Steering End Cap Removal
Electro-hydraulic power steering was installed with the six cylinder Verados as far as I know. I believe the early 150 HP Verados were six cylinder engines. The six cylinder 150 HP Verados were replaced by the previous 135 HP model. Then only change to the 135 HP to increase the HP to 150 was modifi...
- Thu Oct 27, 2022 10:18 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Marine Tech Tool for Uflex Steering End Cap Removal
- Replies: 5
- Views: 1046
Re: Marine Tech Tool for Uflex Steering End Cap Removal
The endcap seal replacement problems continue. Ultimately I went through the process twice with our 135 Verado. The last time I did this was in 2020 and it was very easy. The latest endcap design at that time was a hexagonal shape which required only an open end wrench to install. Because the origin...
- Wed Oct 19, 2022 10:28 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2002 210 outrage water intrusion.
- Replies: 2
- Views: 843
Re: 2002 210 outrage water intrusion.
I doubt the three inch list is caused by water. As Phil has suggested, investigate alternative causes. Is your Outrage equipped with a live bait tank?
- Wed Oct 19, 2022 10:22 am
- Forum: The GAM
- Topic: Fire Extinguisher Requirements
- Replies: 5
- Views: 1438
Re: Fire Extinguisher Requirements
West Marine lists two 5BC units. The website provides the dimensions under the Specs heading. The more expensive one is shorter than the value priced one and may be a better fit for some consoles. Those of us who have deck mounted fuel tanks may not be required to have an extinguisher on board. I be...
- Tue Oct 18, 2022 9:59 am
- Forum: The GAM
- Topic: Fire Extinguisher Requirements
- Replies: 5
- Views: 1438
Re: Fire Extinguisher Requirements
Thanks for the information. Our Walmart store does not stock the 5BC but delivery is available in three days. I have been unable to find the dimensions of the extinguisher on either the Walmart of Kidde websites. I could not find the part number cited by Walmart on the Kidde website but did find a s...
- Fri Oct 14, 2022 10:13 am
- Forum: The GAM
- Topic: Finding Pure Non-Ethanol Gasoline on the Highway in USA and Canada
- Replies: 3
- Views: 1048
Re: Finding Pure Non-Ethanol Gasoline on the Highway in USA and Canada
Small engine yard equipment and generators all benefit from using non-ethanol gasoline.
The warranty on our Echo trimmers and blowers all exempt carburetor repair claims if ethanol fuel was used.
The warranty on our Echo trimmers and blowers all exempt carburetor repair claims if ethanol fuel was used.
- Sat Oct 08, 2022 11:03 am
- Forum: PERFORMANCE
- Topic: Outrage 26 Leans At Higher Boat Speeds
- Replies: 9
- Views: 5582
Re: Outrage 26 Leans At Higher Boat Speeds
You should be able to visually inspect the Flo-Torq hubs with the boat in the water. Q6: Is the boat kept in a slip or on a mooring? Q7: Do you have a trailer for the boat? Q8: How many engine mounting holes are visible above the engines? Q9: How many were visible before lowering the engines? If you...
- Fri Oct 07, 2022 10:15 am
- Forum: PERFORMANCE
- Topic: Outrage 26 Leans At Higher Boat Speeds
- Replies: 9
- Views: 5582
Re: Outrage 26 Leans At Higher Boat Speeds
Supercharged Verado engines typically have anodes in the anti-ventilation plate above the propellers, but the anodes do not have the trim tab typical to most outboards, at least in single engine installations. It would be helpful to know the mounting height before the engines were lowered and after ...
- Wed Oct 05, 2022 10:37 am
- Forum: The GAM
- Topic: Finding Source of Water Ingress
- Replies: 4
- Views: 2896
Re: Finding Source of Water Ingress
The use of tinted marine antifreeze is an excellent suggestion. Walmart, for example, sells RV antifreeze in gallon containers at affordable prices.
- Tue Oct 04, 2022 10:38 am
- Forum: The GAM
- Topic: Finding Source of Water Ingress
- Replies: 4
- Views: 2896
Re: Finding Source of Water Ingress
If the hull is out of the water a leak can often be located by putting water inside the hull and finding where it comes out. If the boat is on a trailer it may be a good idea to block up the trailer frame to prevent stress to the springs. Dye can be added to the water to make a visual search easier....
- Sat Oct 01, 2022 9:22 am
- Forum: PERFORMANCE
- Topic: GUARDIAN 27 Re-power
- Replies: 8
- Views: 5237
Re: GUARDIAN 27 Re-power
My tendency is to install the maximum rated HP for a hull. People with sufficient power are seldom disappointed with performance. Complaints about under powered hulls are common. Unless a boat is used for commercial purposes and gets a lot more than the typical 100 hours per year of recreational boa...
- Wed Sep 28, 2022 10:16 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding swing tongue to trailer
- Replies: 4
- Views: 1934
Re: Adding swing tongue to trailer
It is a relatively simple procedure. After careful consideration of where and how the winch post will be located the trailer tongue is sawed in half. Holes are drilled to accommodate the hinge, any modifications required to the trailer wiring are made and the hinge is bolted to the two trailer tongu...
- Wed Sep 28, 2022 10:06 am
- Forum: The GAM
- Topic: A Boat for Lake Conroe in Texas and for a Garage
- Replies: 7
- Views: 3306
Re: A Boat for Lake Conroe in Texas and for a Garage
Our 1981 Sport 13 requires 19 feet and 5 inches of garage space from the rearmost part of the lowered engine to the tip of the hitch. It's not unreasonable to assume a 15 footer would require 21 feet and 5 inches of space. Add to that the room required to move around the boat. For a "standard&q...
- Mon Sep 26, 2022 9:45 am
- Forum: The GAM
- Topic: A Boat for Lake Conroe in Texas and for a Garage
- Replies: 7
- Views: 3306
Re: Garage Fit
If the trailer tongue for a 15-foot boat extends into the garage a little farther than is comfortable consider adding a tongue hinge so the tongue can be folded.
- Tue Sep 20, 2022 11:50 am
- Forum: The GAM
- Topic: Polymer Sealer Advertised on Television
- Replies: 2
- Views: 1442
Re: Polymer Sealer Advertised on Television
Try searching on youTube.
- Fri Sep 09, 2022 11:36 am
- Forum: PERFORMANCE
- Topic: 2020 210 Dauntless
- Replies: 5
- Views: 3501
Re: New to me 2020 210 Dauntless
The sources for the test speed you mention may not be reliable. Boston Whaler reports test date on their website. That is probably the best source for test data for your model and power. I believe tests may not be on a 210 with a hardtop. A hard top will reduce top speed due to its weight and wind r...
- Thu Sep 08, 2022 10:33 am
- Forum: The GAM
- Topic: Custom 16-footer Ready-made Boat Cover
- Replies: 6
- Views: 1929
Re: Custom 16-footer Ready-made Boat Cover
When we purchased a 190 Montauk with side rails but without a bow rail we were unable to find a stock cover anywhere. I called Carver Covers to discuss our needs. The customer service representative advised that a cover made for a 190 with a bow rail may fit to our satisfaction and if after trying o...
- Mon Sep 05, 2022 10:44 am
- Forum: PERFORMANCE
- Topic: 2007 235 CONQUEST Re-power
- Replies: 4
- Views: 3250
Re: 2007 235 CONQUEST Re-power
I have not seen any published data on specific life spans on any outboard engines. I believe 640 hours would be considered low, especially for a 2006 model year Verado. Given the cost of new engines and the almost one year wait to acquire one I would have the engine checked out by a Certified Verado...
- Thu Sep 01, 2022 10:17 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: MONTAUK 17 Bimini Top Length
- Replies: 7
- Views: 2498
Re: Re: MONTAUK 17 Bimini Top Length
An 8-feet-long Bimini Tops would give lots of coverage. I see pontoon boats using two large Bimini Tops.
- Thu Aug 25, 2022 9:00 am
- Forum: The GAM
- Topic: Identify Boat From HIN and Picture
- Replies: 6
- Views: 2400
Re: Identify Boat From HIN and Picture
From the photograph I believe your boat is sitting on a roller trailer. Roller trailers are not usually recommended for Boston Whaler hulls due to the possibility of dimpling of the hull. In the case of a fairly light CPD hull this may be unimportant but it could be worth your time to look into that.
- Tue Aug 23, 2022 10:23 am
- Forum: VHF MARINE RADIO
- Topic: Using Handheld Radio as Alternative to Fixed Mount Radio with Antenna
- Replies: 4
- Views: 3235
Re: Using Handheld Radio as Alternative to Fixed Mount Radio with Antenna
I would consider a nice new VHF in the dash and connect it to a rail mounted three-foot whip attached to the hand rail as low as necessary on the console side mounted grab rail. I would get a VHF that includes an AIS receiver and connect it to the chart ploterS so it can show AIS targets on the map....
- Tue Aug 23, 2022 10:07 am
- Forum: PERFORMANCE
- Topic: Increased engine spray after engine raised
- Replies: 6
- Views: 3689
Re: Increased engine spray after engine raised
I recommend raising the engine one more hole. I've enjoyed bet performance when the A/V plate is virtually at the water when cruising on plane.
Since it requires little effort and no cost to raise the engine why not give it a try?
Since it requires little effort and no cost to raise the engine why not give it a try?
- Tue Aug 23, 2022 10:00 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mercury 60-HP Big Foot ELPT Rough Idle and Choking
- Replies: 3
- Views: 2898
Re: Mercury 60-HP Big Foot ELPT Rough Idle and Choking
If you use a portable fuel tank consider removing the fuel line from the tank and sinking it in fresh fuel from another source. Then test run the engine for a few minutes on the muffs for long enough to have cleared all the old fuel from the hose, filters, fuel rail, etc. If the engine continue to r...
- Sun Aug 21, 2022 12:16 pm
- Forum: VHF MARINE RADIO
- Topic: What's Wrong With This Picture: 170 MONTAUK Antenna
- Replies: 2
- Views: 2471
Re: What's Wrong With This Picture: 170 MONTAUK Antenna
On our previously owned 190 Montauk the VHF antenna mount was in about the same location [as shown above in Figure 1]. However, our antenna was mounted to the top of a Shakespeare extension mast. The antenna was a Digital 3-foot stainless steel model. Performance was exceptional. We did not have a B...
- Sat Aug 20, 2022 10:30 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2013 Mercury VERADO Engines Spontaneously Goes into THROTTLE ONLY Mode
- Replies: 3
- Views: 1544
Re: 2013 Mercury VERADO Engines Spontaneously Goes into THROTTLE ONLY Mode
A total reboot of all the electrical/electronic systems by removing the battery's ground for a few moments may also be useful.