Search found 11722 matches
- Mon Jan 08, 2024 4:19 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: E-TEC Engine: Maintenance History After Ten Seasons
- Replies: 23
- Views: 14028
Re: E-TEC Engine: Maintenance History After Ten Seasons
Following up on the routine maintenance for my model year 2010 E-TEC V6 3.3-liter 225-HP engine as of the winterization in September 2023: there was no additional maintenance performed. The engine was operated in the 2023 season for about 30-hours, and there were no abnormal conditions, alerts, or w...
- Mon Jan 08, 2024 4:14 pm
- Forum: The GAM
- Topic: Field Report: 2016 Evinrude E-TEC 90 Engine
- Replies: 6
- Views: 1311
Re: Field Report: 2016 Evinrude E-TEC 90 Engine
A better website to inquire specifically with owners of an E-TEC 90-HP engine will be at the ETECOWNERSGROUP. COM website. That website is specifically focused on E-TEC engines, and the forum is organized by engine size and horsepower. To find more information about E-TEC in-line three-cylinder engi...
- Mon Jan 08, 2024 4:06 pm
- Forum: The GAM
- Topic: Field Report: 2016 Evinrude E-TEC 90 Engine
- Replies: 6
- Views: 1311
Re: Field Report: 2010 E-TEC 225-HP Engine
I bought a model year 2010 E-TEC V6 225-HP engine in the Summer of 2009. Beginning in 2018 and following years, I have written extensively about the routine service that has been performed and also about any unusual repairs that were necessary. You can read my detailed report at E-TEC Engine: Mainte...
- Mon Jan 08, 2024 4:45 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: Connecting AIS Receiver to Chart Plotter
- Replies: 0
- Views: 994
Connecting AIS Receiver to Chart Plotter
To transmit data about AIS targets from an AIS receiver to a chart plotter, the data will sent from the receiver to the chart plotter using a NMEA protocol which is supported by both devices. Generally legacy devices will only support NMEA-0183 for interconnection of data, but more recent devices ma...
- Sun Jan 07, 2024 8:38 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Repair Delaminated Cockpit Deck Section
- Replies: 1
- Views: 522
Re: Repair Delaminated Cockpit Deck Section
Q1: how can de-lamination of the aft cockpit deck on my 1989 OUTRAGE 22 Whaler Drive boat be repaired? If the de-lamination is small and limited in length, and if the embedded wood in that region is not deeply rotted, you could mechanically remove the rotted wood, and then fill the void with epoxy ...
- Thu Jan 04, 2024 10:06 pm
- Forum: The GAM
- Topic: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
- Replies: 13
- Views: 1330
Re: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
Regarding the existing wiring for the the primary power distribution using four batteries and twin engines, there is no way to know the exact circuitry that is in place. Much like the modification made to the boat after it left the Boston Whaler factory to employ Yamaha remote controls and engine ig...
- Wed Jan 03, 2024 11:25 am
- Forum: The GAM
- Topic: Tesla Boat Trailer Towing
- Replies: 22
- Views: 3161
Re: Tesla Boat Trailer Towing
Did the hybrid F-150 truck qualify for a federal refund of $7,500 under its program to encourage adoption of electric vehicles?Mambo Minnow wrote:I hedged my bet and bought a Ford F-150 PowerBoost hybrid in 2021 to tow my Whaler.
- Wed Jan 03, 2024 10:54 am
- Forum: The GAM
- Topic: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
- Replies: 13
- Views: 1330
Re: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
The wiring diagrams I need are: ⋅ diagram on how to re-wire a Yamaha engine harness and ignition key switch to connect to a Mercury ignition key switch I doubt you can find a diagram from either Yamaha or Mercury that will give you a wiring configuration for using a Yamaha key switch and ...
- Wed Jan 03, 2024 10:42 am
- Forum: The GAM
- Topic: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
- Replies: 13
- Views: 1330
Re: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
The information I need about the boat is: ⋅ gray water tank volume ⋅ fresh water tank volume ⋅ fuel tank volume From the 1995 Boston Whaler catalogue: The freshwater tank has a capacity of 30-gallons. The fuel tank is aluminum and has a capacity of 243 gallons. However...
- Wed Jan 03, 2024 10:24 am
- Forum: The GAM
- Topic: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
- Replies: 13
- Views: 1330
Re: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
You have still not clearly stated the model year of the Mercury 225-HP OptiMax engines. Perhaps since they were installed in 2002 they might be model year 2002 engines. Usually the model year of an outboard engine is identified by a decal or tag or plate attached to the engine. You should make a clo...
- Tue Jan 02, 2024 9:50 am
- Forum: The GAM
- Topic: Method of Indicating Federal Hull Identification number
- Replies: 22
- Views: 2239
Re: Method of Indicating Federal Hull Identification number
msteinkampf--I had speculated that perhaps the DYNO company had made a label die that would imprint the reversed letters as a method of casting an imprint into a mold, but I had not pursed any inquiry with DYNO about that. To hear from your research that there was such a label-making die available i...
- Tue Jan 02, 2024 9:47 am
- Forum: The GAM
- Topic: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
- Replies: 13
- Views: 1330
Re: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
If you are hoping for readers to assist you, I again remind you that you need to clearly describe the MODEL YEAR and the MODEL DESIGNATORS for the Mercury 225-HP engines for which you are looking for information or copies of the owner's manual and for electrical wiring diagrams. By giving readers th...
- Tue Jan 02, 2024 9:43 am
- Forum: The GAM
- Topic: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
- Replies: 13
- Views: 1330
Re: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
I do not think there is anything particularly unusual or exotic about the 1995 OFFSHORE 27 that would require being explained in detail in an owner's manual. For many years Boston Whaler only published rather generic owner's manuals that covered many models and lengths of boat. In the REFERENCE sect...
- Tue Jan 02, 2024 9:27 am
- Forum: The GAM
- Topic: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
- Replies: 13
- Views: 1330
Re: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
I do not think there is anything particularly unusual or rare in the Mercury 225-HP engines. You should contact a Mercury dealer and inquire if you can purchase printed copies of the owner's manual. If you want wiring diagrams for the engine, you will have to purchase a printed copy of the service m...
- Tue Jan 02, 2024 9:21 am
- Forum: The GAM
- Topic: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
- Replies: 13
- Views: 1330
Re: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
No. You can be certain that if I knew someone who owned an OFFSHORE 27 boat, I would have already suggested to you to contact that person.Bawausa wrote:Q5: JIMH--do you know of any one that owns a OFFSHORE 27 offshore?
- Sun Dec 31, 2023 11:22 am
- Forum: The GAM
- Topic: Gel Coat Color Use Reference from Boston Whaler
- Replies: 0
- Views: 959
Gel Coat Color Use Reference from Boston Whaler
Boston Whaler has published a great resource for information about gel coat resin colors, the years the colors were used, and what Spectrum Gel Coat resin part number would be the equivalent. The PDF document can be accessed at https://www.bostonwhaler.com/resources-and-maintenance.html#:~:text=2024...
- Fri Dec 29, 2023 7:33 pm
- Forum: The GAM
- Topic: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
- Replies: 13
- Views: 1330
Re: Source for Owner’s Manual, Wiring Diagrams
For help with Boston Whaler boat owner’s manuals, contact Boston Whaler customer service. You can also find many owner's manual and diagrams for Boston Whaler boats at this resource: https://www.bostonwhaler.com/resources-and-maintenance.html The does not appear to be any information for the OFFSHOR...
- Fri Dec 29, 2023 7:31 pm
- Forum: The GAM
- Topic: Source for Owner’s Manual, Wiring Diagrams for 1995 OFFSHORE 27 and Mercury 225-HP Engines
- Replies: 13
- Views: 1330
Re: Source for Owner’s Manual, Wiring Diagrams
For help with engine manuals read at https://continuouswave.com/whaler/reference/ownersManuals.html You should mention the model and model year of the Mercury engines so that readers will be better able to help you located the particular owner's manual and the wiring diagrams for the engines you hav...
- Fri Dec 29, 2023 9:47 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: RADAR for 17-foot Skiff
- Replies: 3
- Views: 675
Re: RADAR for 17-foot Skiff
Q1: what is the smallest RADAR that Montauk 17 owners have on their boat? I am not aware of any reliable statistical data about uses of RADAR on a MONTAUK 17 boat. Any reports of MONTAUK 17 boats having installed RADAR will be just anecdotal. Any advice and recommendation will be greatly appreciate...
- Fri Dec 29, 2023 8:37 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Marine Toilet and Windlass for 2000 CONQUEST 23
- Replies: 6
- Views: 879
Re: Marine Toilet and Windlass for 2000 CONQUEST 23
ASIDE: Here is a short recounting of an incident related to using an electrically operated windlass to handle the anchor chores: Many years ago, we were anchored in a 30-foot sail boat in a vary nice cove in northern Lake Huron in the Benjamin Islands. Another boater came into the cove, operating a ...
- Fri Dec 29, 2023 7:57 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Marine Toilet and Windlass for 2000 CONQUEST 23
- Replies: 6
- Views: 879
Re: Marine Toilet and Windlass for 2000 CONQUEST 23
The previous owner of this 2000 CONQUEST 23 must have been focused on simplicity. He removed two rather expensive options from the boat, the marine toilet with holding tank and pump out, and the electric windlass. I doubt that this fellow was the original purchaser of the boat: why would he pay for ...
- Thu Dec 28, 2023 8:48 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Marine Toilet and Windlass for 2000 CONQUEST 23
- Replies: 6
- Views: 879
Re: Marine Toilet and Windlass for 2000 CONQUEST 23
Regarding a suitable replacement windlass: Q3: do you intend to use a windlass powered by an electric motor? Q4: if you intend to use an electric windlass, was the original windlass that has been removed also an electric-motor operated windlass? Q5: if the original windlass was operated by an electr...
- Thu Dec 28, 2023 8:39 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Marine Toilet and Windlass for 2000 CONQUEST 23
- Replies: 6
- Views: 879
Re: Marine Toilet and Windless for 2000 CONQUEST 23
If the 2000 CONQUEST 23 boat already has a black water holding tank with vent and pump out, you can use a marine toilet that does not have its own holding tank. If the boat does not already have a holding tank with vent and pump out, you may need to use a marine toilet that has its own holding tank....
- Sun Dec 24, 2023 1:29 pm
- Forum: GLOBAL NAVIGATION SATELLITE SYSTEMS
- Topic: A Very Merry GPS Christmas
- Replies: 0
- Views: 1493
A Very Merry GPS Christmas
December 2023 is an interesting time for the Global Positioning System, which has become such an essential part of boat navigation. I am old enough to remember boat navigation without any electronic aids, where I used just deduced reckoning to keep an estimated boat position between position fixes. ...
- Sat Dec 23, 2023 3:13 pm
- Forum: The GAM
- Topic: The Future of Boating According to Brunswick
- Replies: 2
- Views: 803
Re: The Future of Boating According to Brunswick
There must be some grant money going into electrification of boats, or at least that is my deduction from seeing the installation of a very large, very powerful boat charging facility at the local marina in tiny Northport, Michigan. I asked the harbor master who was paying for the installation, and ...
- Sat Dec 23, 2023 2:39 pm
- Forum: The GAM
- Topic: Shipping Guardian 19
- Replies: 6
- Views: 974
Re: Shipping Guardian 19
Q1: are the GUARDIAN model and red dot are the same? The red dot was a marker created by using tinted gel coat in the initial gel coat resin layer of the hull lamination in a female contact mold. The dot was placed on the hullsides near the stern and at a location near where the decal indicating th...
- Sat Dec 23, 2023 10:25 am
- Forum: The GAM
- Topic: Shipping Guardian 19
- Replies: 6
- Views: 974
Re: Shipping Guardian 19
Get a quote from
https://www.boatmovers.com/
I don’t think any cross-USA movement is going to be really inexpensive.
https://www.boatmovers.com/
I don’t think any cross-USA movement is going to be really inexpensive.
- Fri Dec 22, 2023 11:33 am
- Forum: GLOBAL NAVIGATION SATELLITE SYSTEMS
- Topic: WAAS Satellite Changes
- Replies: 5
- Views: 747
Re: WAAS Satellite Changes
Regarding the elevation angle and path lengths calculated for a WAAS satellite, we have also found a typical path length as shown above, in the case of a receiver at 42-degrees latitude. The optimum path length for a WAAS satellite occurs when the receiver is on the equator and at the longitude of t...
- Fri Dec 22, 2023 9:06 am
- Forum: GLOBAL NAVIGATION SATELLITE SYSTEMS
- Topic: WAAS Satellite Changes
- Replies: 5
- Views: 747
How to input Greek letters
NOTE TO MYSELF How I figured out a way to type the Greek lower case letter gamma using MacOS and enter it in the drawing program GIMP. In MacOS System Preferences, open the Keyboard. In the Input Sources tab, click the plus (+) sign at lower left. Browse through the language sources, and select Gree...
- Thu Dec 21, 2023 3:36 pm
- Forum: GLOBAL NAVIGATION SATELLITE SYSTEMS
- Topic: WAAS Satellite Changes
- Replies: 5
- Views: 747
Re: WAAS Satellite Changes
Note that in the diagram shown in Figure 1, repeated below https://continuouswave.com/forum/download/file.php?id=9409 the relationship shown in the drawing occurs in a particular situation with a geostationary satellite orbit which happens to be located on your meridian. In that case satellite subpo...
- Thu Dec 21, 2023 9:13 am
- Forum: MARKETPLACE
- Topic: APPRAISAL: 2005 Montauk 170 (repowered)
- Replies: 6
- Views: 1152
Re: APPRAISAL: 2005 Montauk 170 (repowered)
If you are seriously thinking about buying the boat for which you asked for an appraisal, I would not wait several weeks--unless the asking price is quite out of line. A popular Boston Whaler model in nice condition at a fair price will sell rapidly.
- Thu Dec 21, 2023 8:53 am
- Forum: The GAM
- Topic: Method of Indicating Federal Hull Identification number
- Replies: 22
- Views: 2239
Re: Method of Indicating Federal Hull Identification number
The molded-in HIN number seen in Figure 16 for c.1973 hull looks like it was done with a Dymo Tape Label printer. But I am trying to figure out how the process was accomplished. The hull is molded in a female contact mold, so the plastic tape must have been stuck inside the mold for the number to ap...
- Wed Dec 20, 2023 1:57 pm
- Forum: MARKETPLACE
- Topic: APPRAISAL: 2005 Montauk 170 (repowered)
- Replies: 6
- Views: 1152
Re: APPRAISAL: 2005 Montauk 170 (repowered)
For comparison, I will use a 170 MONTAUK boat that was listed recently and sold in a very short time for $35,000 . That boat was newer, 2015, but its engine was older, also 2015. As far as the boat, as long as the condition of the 2005 boat is excellent, I do not see a great difference in value comp...
- Tue Dec 19, 2023 10:39 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 13-foot Hull Modification to Increase Beam
- Replies: 4
- Views: 761
Re: 13-foot Hull Modification to Increase Beam
Regarding the modification you have described to the hull where it is cut in half down the center line through the keel, then an entirely new center section of the hull is created in some manner, and this new center section is then laminated to the two original halves of the hull, I don't see this a...
- Tue Dec 19, 2023 10:26 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 13-foot Hull Modification to Increase Beam
- Replies: 4
- Views: 761
Re: 13-foot Hull Modification to Increase Beam
Regarding the dodger you mention as having been a modification to the hull of a 13-foot Boston Whaler boat, are you trying to describe a structure that was added to the hull? Or are you just describing a canvas and frame assembly creating a dodger? If you are just describing a canvas and frame assem...
- Mon Dec 18, 2023 11:21 am
- Forum: The GAM
- Topic: Engine Safety Shut Off with Wireless Sensors
- Replies: 16
- Views: 2462
Re: Engine Safety Shut Off with Wireless Sensors
As far as I have found, there are only two devices on the market that use wireless sensors to replace the normal physical lanyard engine shut off safety switch. Both devices are aftermarket products that are to be installed by the buyer. The two brands are FELL MARINE and ACR. The FELL MARINE wirele...
- Sun Dec 17, 2023 11:35 am
- Forum: The GAM
- Topic: The Future of Boating According to Brunswick
- Replies: 2
- Views: 803
The Future of Boating According to Brunswick
In the thread "Boston Whaler Leaders" ( pinned above ) there is a quote from the CEO of Brunswick, Dave Foulkes, in which he mentions Brunswick's "industry-defining ACES strategy." When recently re-reading that thread, I had no idea what an ACES strategy was. Upon some further re...
- Sat Dec 16, 2023 5:14 pm
- Forum: MARKETPLACE
- Topic: FS: 2015 170 Montauk with Trailer $35,000 in North Carolina
- Replies: 2
- Views: 700
Re: FS: 2015 170 Montauk with Trailer $35,000 in North Carolina
Thank you for the follow up. I was quite honestly thinking about making an inquiry myself about this offer. As I have always said, used Boston Whaler boats that are popular models, are in excellent condition, and are reasonably priced are then usually sold to the first person who inquires with actua...
- Sat Dec 16, 2023 5:08 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 13-foot Hull Modification to Increase Beam
- Replies: 4
- Views: 761
Re: 13-foot Hull Modification to Increase Beam
Does Mr. Radon have a website? If so, perhaps you can give the URL for it.
- Sat Dec 16, 2023 5:03 pm
- Forum: The GAM
- Topic: Identify 17-foot Boat with Boston Whaler Characteristics
- Replies: 1
- Views: 541
Re: Identify 17-foot Boat with Boston Whaler Characteristics
I agree with your observation about the foredeck of the boat shown in Figures 1, 2, and 3 being quite different from what would be seen in a 17-foot boat build by Boston Whaler. My best inference based on the three photographs is the boat was copied from a Boston Whaler 17-foot hull. Perhaps a mold ...
- Sat Dec 16, 2023 4:53 pm
- Forum: The GAM
- Topic: Hull Weight of 1970 SPORT 13
- Replies: 5
- Views: 890
Re: Hull Weight of 1970 SPORT 13
As the weight of a hull increases while the propulsion power remains the same, the maximum hull speed will decrease. Perhaps your perception that adding weight increase the stability of the hull was a result of the boat speed decreasing. If adding weight to a hull incurred no penalty and inherently ...
- Fri Dec 15, 2023 9:04 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: Connecting Mercury SmartCraft to a NMEA 2000 Network
- Replies: 6
- Views: 16547
Re: Connecting Mercury SmartCraft to a NMEA 2000 Network
The designation "gateway" in terms of networking refers to a device that connects to TWO networks, usually of different types using different protocols, and is intended to translate data from one network and that network's protocol to a second network and that second network's protocol. Th...
- Fri Dec 15, 2023 8:59 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1985 MONTAUK 17: Preventing Water Overflowing Transom
- Replies: 7
- Views: 1051
Re: 1985 MONTAUK 17: Preventing Water Overflowing Transom
The Boston Whaler boat most appropriate to use for offshore angling is probably the OUTRAGE 25. That boat has a very wide and completely open transom. The engine splash well is also full-width. The splash well can capture water coming over the transom and immediately drain it out to the sea via the ...
- Wed Dec 13, 2023 3:39 pm
- Forum: VHF MARINE RADIO
- Topic: Calculating Range of Communication
- Replies: 2
- Views: 1043
Re: Calculating Range of Communication
When a radio engineer is faced with the problem of creating a reliable radio circuit between two locations, the distance between the stations is already known and is a fixed constant. The radio engineer begins the design of the communication system with that distance as the principal parameter, and ...
- Tue Dec 12, 2023 11:55 pm
- Forum: PERFORMANCE
- Topic: 1986 OUTRAGE 25: Total Weight Including Trailer
- Replies: 2
- Views: 713
Re: 1986 OUTRAGE 25: Total Weight Including Trailer
To make a guess at your boat total weight with engines and gear, take the dry hull weight and double it. Then add the trailer weight. Using your weight numbers: 2 x 3,300-lbs = 6,600-lbs for boat and gear Adding the 1,500-lbs of trailer gives 6,600-lbs + 1,500-lbs = 8,100-lbs Use a 3/4-ton truck wit...
- Tue Dec 12, 2023 11:40 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1985 MONTAUK 17: Preventing Water Overflowing Transom
- Replies: 7
- Views: 1051
Re: 1985 MONTAUK 17: Preventing Water Overflowing Transom
Being stern-to to large ocean waves in an open 17-foot skiff is probably not the best situation. Perhaps a larger boat with a full transom, a cockpit whose deck level is above the waterline, and large scuppers to permit rapid draining would be better for those conditions. Or, invest in a really good...
- Mon Dec 11, 2023 4:58 pm
- Forum: VHF MARINE RADIO
- Topic: Calculating Range of Communication
- Replies: 2
- Views: 1043
Calculating Range of Communication
Calculating Range of Communication In any radio circuit, an important topic of interest is the anticipated or expected range of communication. There are several elements that affect the range of communication, namely ⋅ transmitter output power ⋅ transmitter transmission line los...
- Sun Dec 10, 2023 2:27 pm
- Forum: The GAM
- Topic: Identify SENTRY from HIN and Photographs
- Replies: 5
- Views: 692
Re: Identify SENTRY from HIN and Photographs
Also, the hull was NOT properly prepared for continual immersion in the water. The hull should have been given a barrier coat and perhaps an anti-fouling coat to protect the gel coat resin from intrusion of water and attachment of marine growth. The hull stains from the water may be able to be remov...
- Sun Dec 10, 2023 2:23 pm
- Forum: The GAM
- Topic: Identify SENTRY from HIN and Photographs
- Replies: 5
- Views: 692
Re: Identify SENTRY from HIN and Photographs
If I can find a higher resolution and larger image and zoom in [to show the HIN], I will update this thread. The HIN should be visible in Figure 2, but I doubt there is sufficient resolution in that image to show anything useful. Actually, the HIN is really not seen at all in that image, which is s...
- Sun Dec 10, 2023 2:07 pm
- Forum: The GAM
- Topic: Identify SENTRY from HIN and Photographs
- Replies: 5
- Views: 692
Re: Identify SENTRY from HIN and Photographs
Regarding the HIN number as BSCYA431K697 This is the so-called NEW FORMAT that was mandatory after Auguest 1984 I will interpret the HIN as follows: BSC = the manufacturer's identity code. As already mentioned, the expectation would be for the MIC to be BWC. That the HIN is BSC and resolves to BOATS...