Search found 1592 matches

by Jefecinco
Fri Apr 01, 2022 11:04 am
Forum: The GAM
Topic: Short Film: SUPER SPORT 15 Underway
Replies: 11
Views: 1746

Re: Short Film: SUPER SPORT 15 Underway

At the price point third party testing would suppress doubters which, while costly, would be desirable. Agree with you that if they are selling all their production any further testing is unnecessary. Perhaps I am mistaken but I believe the so called small boat market would be highly desirable to a ...
by Jefecinco
Tue Mar 29, 2022 9:53 am
Forum: REPAIRS and MODIFICATIONS
Topic: 2003 MONTAUK 17 Bait Tank Location
Replies: 13
Views: 2067

Re: 2003 MONTAUK 17 Bait Tank Location

It's surprising the 170 Montauk live bait well lacks a recirculating water pump. Our 190 Montauk live bait well was supplied with sea water via a through hull fitting piping and a circulating pump to maintain oxygen levels in the bait well water and to keep the water at the same temperature as the s...
by Jefecinco
Tue Mar 29, 2022 9:36 am
Forum: The GAM
Topic: Short Film: SUPER SPORT 15 Underway
Replies: 11
Views: 1746

Re: Short Film: SUPER SPORT 15 Underway

It is unfortunate that Sharrow has not demonstrated superior performance over a wide selection of boat/engine makes and models. That has led to much doubt of the propeller's efficacy in multiple applications.

I suspect the company may have begun marketing before the product was ready.
by Jefecinco
Sun Mar 27, 2022 10:36 am
Forum: The GAM
Topic: Six Outboard Powered USCG Boat
Replies: 13
Views: 1963

Re: Six Outboard Powered USCG Boat

Thank you for that information. What you wrote is entirely possible. I asked participants in a Gulf Coastal blog if anyone had seen a similar boat. After several attempts at humor citing the dangers of drinking while boating a participant posted that he had seen the boat I described on the West side...
by Jefecinco
Fri Mar 25, 2022 10:17 am
Forum: The GAM
Topic: Blue Top Legend
Replies: 12
Views: 4775

Re: Blue Top Legend

Your crowd was far more sophisticated than mine. My Mother tried to convince me that a Raleigh bicycle was the best available at the time, 1948 or 1949. I don't know if it was an English brand but it had skinny tires and looked "funny" to me.
by Jefecinco
Thu Mar 24, 2022 11:05 am
Forum: REPAIRS and MODIFICATIONS
Topic: 2003 MONTAUK 17 Bait Tank Location
Replies: 13
Views: 2067

Re: 2003 MONTAUK 17 Bait Tank Location

If you don't need a large amount of bait or a large bait tank. A five-gallon utility bucket with lid and air pump in the cockpit works very well. We secure ours with a bungee cord. If we are angling from both ends of the boat we secure it approximately midships, otherwise we just keep it handy.
by Jefecinco
Thu Mar 24, 2022 11:01 am
Forum: The GAM
Topic: Blue Top Legend
Replies: 12
Views: 4775

Re: Blue Top Legend

Come on, guys. If you didn't have a Columbia you didn't have a bicycle. Mine had a front wheel shock absorbing spring.
by Jefecinco
Sat Mar 19, 2022 10:03 am
Forum: The GAM
Topic: 2005 270 OUTRAGE Live Well Fills with Water
Replies: 8
Views: 1478

Re: 2005 270 OUTRAGE Live Well Fills with Water

Live bait wells normally have a two way valve between the water inlet through hull fitting and the live well. It is usually found close the thru hull fitting. If space permits a similar valve could be installed in the forward fish well of you Outrage.
by Jefecinco
Fri Mar 18, 2022 12:05 pm
Forum: The GAM
Topic: Six Outboard Powered USCG Boat
Replies: 13
Views: 1963

Re: Six Outboard Powered USCG Boat

I just spoke with Mobile Sector USCG OOD and she disclaimed any such boat. My wife agrees the boat we saw was a CG vessel and had six outboards. Regret the post.
by Jefecinco
Fri Mar 18, 2022 10:49 am
Forum: The GAM
Topic: Six Outboard Powered USCG Boat
Replies: 13
Views: 1963

Re: Six Outboard Powered USCG Boat

Jim - Thanks for calling the Pensacola USCG Station. I will call the Mobile station. Phil - Agree a photo would be helpful. Unfortunately I'm one of those old guys who does not have a cell phone at his fingertips at all times. Otherwise I could flood the site with photos of interesting traffic on th...
by Jefecinco
Fri Mar 18, 2022 10:34 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1974 OUTRAGE: Identify Bolts in Motor Well; Adhesive Used to Join Hull Sections
Replies: 10
Views: 1636

Re: 1974 OUTRAGE: Identify Bolts in Motor Well; Adhesive Used to Join Hull Sections

What happens to the foam flotation when the deck assembly is separated from the hull assembly? My understanding is that the foam is injected under high pressure after the deck is attached to the hull. Would the operation not involve significant risk to the integrity of the flotation, not to mention ...
by Jefecinco
Thu Mar 17, 2022 10:43 am
Forum: The GAM
Topic: Six Outboard Powered USCG Boat
Replies: 13
Views: 1963

Re: Six Outboard Powered USCG Boat

Phil - The boat pictured was very similar but larger than the one I saw. JimH - The engine cowlings were black. The boat was clearly not a seizure boat modified for CG use. We have seen virtually identical CG boats with as many as four engines recently. These type boats routinely patrol the waterway...
by Jefecinco
Wed Mar 16, 2022 11:44 am
Forum: The GAM
Topic: Six Outboard Powered USCG Boat
Replies: 13
Views: 1963

Six Outboard Powered USCG Boat

Yesterday I saw a USCG boat with six Verado outboards on the transom. The two center engines were tilted out of the water. I was unable to determine the engine's horsepower. I'm unsure of the boat model but believe it was a Response boat. It had a large pilothouse, a flotation collar and a pronounce...
by Jefecinco
Wed Mar 16, 2022 10:45 am
Forum: REPAIRS and MODIFICATIONS
Topic: Trailer Refurbishment: 1992 E-Z-LOADER
Replies: 25
Views: 10785

Re: Trailer Refurbishment: 1992 E-Z-LOADER

Nice device. It's on my list. Thank you.
by Jefecinco
Tue Mar 15, 2022 10:18 am
Forum: The GAM
Topic: Trailer Road Clearance
Replies: 14
Views: 2292

Re: Trailer Road Clearance

If a mechanic is unsure about doing what you ask him to do, find another mechanic. If I have read the posts correctly you now have seven inches of road clearance with your trailer. If you installed the springs above the axle it would increase the clearance by four inches. That would provide eleven i...
by Jefecinco
Sat Mar 12, 2022 9:57 am
Forum: REPAIRS and MODIFICATIONS
Topic: Hull Sprayed with Bed Liner
Replies: 11
Views: 2041

Re: Hull Sprayed with Bed Liner

It is unlikely the prior owner had the truck bed liner material applied for no reason. In my experience the original Boston Whaler non-skid surfaces provide better non-skid qualities than bed liner material. I would leave the bed liner in place and replace it where it has been removed. I would be af...
by Jefecinco
Sat Mar 12, 2022 9:48 am
Forum: The GAM
Topic: Trailer Road Clearance
Replies: 14
Views: 2292

Re: Trailer Road Clearance

I recommend checking the attitude of your trailer before concerning yourself with the road clearance. Ensure it is approximately level when on level terrain. The height of the hitch ball on your towing vehicle determines the attitude of the trailer under tow. Seven inches of clearance seems low if t...
by Jefecinco
Fri Mar 11, 2022 10:37 am
Forum: The GAM
Topic: A Boat Market Slow Down
Replies: 10
Views: 1571

Re: A Boat Market Slow Down

There are always people who live beyond their means including people who have some serious resources. They may find themselves unable to afford the fuel to "play" with their boats. Speaking for myself, I was never influenced to spend less time boating by the cost of fuel. Of all the costs ...
by Jefecinco
Tue Mar 08, 2022 9:37 am
Forum: The GAM
Topic: Keeping the Great Lakes Great
Replies: 1
Views: 591

Re: Keeping the Great Lakes Great

It's excellent news that the Corps of Engineers received federal funding of almost a billion dollars to help in the fight against further invasion of the Asian Carp. It's a shame the planned work will take eight years to complete. Regardless, it's progress.
by Jefecinco
Sat Mar 05, 2022 9:46 am
Forum: REPAIRS and MODIFICATIONS
Topic: 2006 Verado 150 Trim Pump Replacement
Replies: 14
Views: 4729

Re: 2006 Verado 150 Trim Pump Replacement

Long ago I read that sacrificial anodes can become "coated" with a substance that inhibits effectiveness. I'm unable to recall the specifics of the anode material, zinc or aluminum, nor the chemical reaction causing the anode failure. The advice provided with the information was to replace...
by Jefecinco
Tue Mar 01, 2022 10:25 am
Forum: REPAIRS and MODIFICATIONS
Topic: 2006 Verado 150 Trim Pump Replacement
Replies: 14
Views: 4729

Re: 2006 Verado 150 Trim Pump Replacement

If you are in a slip and your engine lower unit is in the water anything connected to the engine is susceptible to stray current corrosion or erosion. Any water in the bilge can also contribute to problems. It makes no difference if you are not connected to shore power. If you have neighboring boats...
by Jefecinco
Tue Mar 01, 2022 10:15 am
Forum: The GAM
Topic: Enough Winter
Replies: 25
Views: 3908

Re: Enough Winter

We just received our power bill. It's slightly over $200, the highest we have had since moving here almost four years ago. The forecast for the first week in March is for seven days with highs in the seventies. I'll be starting the Mercury to ensure there is no gunk in the injectors this week. We wi...
by Jefecinco
Sun Feb 27, 2022 10:16 am
Forum: The GAM
Topic: 2003 Outrage 21 or 2007 190 Montauk
Replies: 7
Views: 1281

Re: 2003 Outrage 21 or 2007 190 Montauk

We owned a 190 Montauk bought primarily for inshore and near offshore fishing. It excelled in both roles. The optional aft live bait well was a very useful option. We also added two rail mounted stainless steel clamp on rod holders to the side rails. The boat was powered with a 135 HP Verado engine ...
by Jefecinco
Fri Feb 25, 2022 10:00 am
Forum: PERFORMANCE
Topic: Modifying 2005 130 SPORT Hull
Replies: 13
Views: 5987

Re: Modifying 2005 130 SPORT Hull

I have doubts that a 2005 130 Sport hull is designed with a hook. Anyone with an identical hull who can determine the existence or not of a hook please provide the answer.
by Jefecinco
Thu Feb 24, 2022 10:37 am
Forum: PERFORMANCE
Topic: Modifying 2005 130 SPORT Hull
Replies: 13
Views: 5987

Re: Modifying 130 SPORT Hull

Q3: Does the 130 Sport hull have a hook?
by Jefecinco
Tue Feb 22, 2022 10:17 am
Forum: PERFORMANCE
Topic: 370 OUTRAGE Fuel Economy
Replies: 9
Views: 13538

Re: 370 OUTRAGE Fuel Economy

Tuning the ECU to increase engine HP is no longer easy. Simon Motorsports was one of the leading tuners but I believe the EPA has had a lot of success in shutting down tuners. If you can find 350 HP Verado ECUs to replace your original ECUs that may be your least cost option to increase your engines...
by Jefecinco
Sun Feb 20, 2022 10:58 am
Forum: SMALL BOAT ELECTRICAL
Topic: 1986 Outrage 18 Moving Battery to Console from Stern
Replies: 4
Views: 3459

Re: 1986 Outrage 18 Battery moving questions

Will moving the switch to the console reduce the battery cable lengths If moving it does not improve operation or save money I would leave it where it is most convenient to use. All the battery switches I have used were in the console and it was not easy or convenient to operate them there.
by Jefecinco
Sun Feb 20, 2022 10:53 am
Forum: REPAIRS and MODIFICATIONS
Topic: Southeast Michigan Repair Shop for Engine Cowling
Replies: 5
Views: 1087

Re: Southeast Michigan Repair Shop for Engine Cowling

If you can find a local firm that applies advertising "wraps" on vehicles they may have expertise in applying decals. An employee may be willing to apply your decals after hours if the job is too small for the firm or if they are backed up.
by Jefecinco
Fri Feb 18, 2022 10:34 am
Forum: The GAM
Topic: New Coast Guard Fire Extinguisher Regulations
Replies: 7
Views: 1577

Re: New Coast Guard Fire Extinguisher Regulations

We purchase new flares when our old ones become outdated. We keep the expired flares as backup to the new ones. When in trouble on the water a few extra flares could be helpful. We prefer parachute flares because they are far more likely to be seen due to their longer fall duration or hover time.
by Jefecinco
Wed Feb 16, 2022 10:34 am
Forum: The GAM
Topic: Enough Winter
Replies: 25
Views: 3908

Re: Enough Winter

But, you could be in Maine.
by Jefecinco
Mon Feb 14, 2022 9:52 am
Forum: The GAM
Topic: Enough Winter
Replies: 25
Views: 3908

Re: Enough Winter

It was 34 F here in Gulf Shores as of 7:00 this morning. The average is 44 F for this time of year. December was kind to us but January and, so far, February have been much colder than usual. Forecast don't indicate that we will see much improvement for the second half of February. Hopefully we will...
by Jefecinco
Sun Feb 13, 2022 10:08 am
Forum: REPAIRS and MODIFICATIONS
Topic: Gel Coat Color for 2012 150 MONTAUK
Replies: 8
Views: 1372

Re: Gel Coat Color for 2012 150 MONTAUK

It appears that the cracks may extend up under the rubrail. I hope your repair can be made without removing it.

Our West Marine store stocks Marine Tex.
by Jefecinco
Sun Feb 13, 2022 10:04 am
Forum: The GAM
Topic: Enough Winter
Replies: 25
Views: 3908

Re: Enough Winter

Bama - The waterway was busy with fishing boats yesterday and there were several kayaks working the rip rap and structure. I saw one angler taking three large Sheepsheads in 30 minutes at our neighbors boat lift. He told me he was using live shrimp for bait. The kayak angles prefer the pedal powered...
by Jefecinco
Sat Feb 12, 2022 10:51 am
Forum: The GAM
Topic: Enough Winter
Replies: 25
Views: 3908

Re: Enough Winter

I spent a winter in North Dakota near the Canadian Border in 1975. I was young and single and the small town near our base, Nekoma, which had a population of fewer than 1000 was quite different from anywhere I have visited. The residents of ND were just about the nicest, friendliest, most welcoming ...
by Jefecinco
Thu Feb 10, 2022 10:23 am
Forum: The GAM
Topic: Enough Winter
Replies: 25
Views: 3908

Enough Winter

I'll be glad to see the last of Winter this year. The limited posts here reflect few people are using or maintaining their Boston Whalers now, me included.
by Jefecinco
Fri Jan 28, 2022 9:22 am
Forum: The GAM
Topic: Boat Insurance Premium Increase
Replies: 7
Views: 1969

Re: Boat Insurance Premium Increase

There is plenty of competition in the boat insurance business. Careful shopping can result in real savings. The usual premium lowering tactics apply. Higher deductibles are one of the easiest ways to lower premiums. I found that my deductible was much lower than necessary because I had not considere...
by Jefecinco
Sun Jan 23, 2022 11:52 am
Forum: PERFORMANCE
Topic: 2002 160 VENTURA with Suzuki DF140BG
Replies: 30
Views: 9692

Re: 2002 160 VENTURA with Suzuki DF140BG

Where we are located on the Alabama Gulf Coast Suzuki is the preferred engine for repowers by professional guides by a wide margin. A few visits to our launch ramps and commercial marinas are indicative of the preference. While on a fishing trip with a local professional guide I asked why he had cho...
by Jefecinco
Tue Jan 18, 2022 10:21 am
Forum: The GAM
Topic: 1981 Outrage V-22 Sterndrive
Replies: 54
Views: 58212

Re: 1981 Outrage V-22 Sterndrive

Ram Mounts are a nice alternative. They offer more flexibility than gimbal mounts and installation is easier. I use on for the multi-function display (MFD) on our Sport 13 due to the very limited console size. On our recently sold 190 Montauk the MFD was flush mounted and on our other previously own...
by Jefecinco
Sun Jan 16, 2022 11:09 am
Forum: PERFORMANCE
Topic: 2002 160 VENTURA with Suzuki DF140BG
Replies: 30
Views: 9692

Re: 2002 VENTURA 160 with Suzuki DF140BG

We owned a DAUNTLESS 16 which is very similar to the 160 VENTURA you own. Our DAUNTLESS 16 was powered with a 1999 Evinrude FICHT 115-HP engine, which was a perfect engine for the boat. A 140-HP engine should provide very exciting performance and provide boat speeds one would seldom use in the small...
by Jefecinco
Sat Jan 15, 2022 10:21 am
Forum: The GAM
Topic: 1981 Outrage V-22 Sterndrive
Replies: 54
Views: 58212

Re: 1981 Outrage V-22 Sterndrive

Flush mounting a GPS display is not always the most effective way to enjoy it. In differing conditions the view of the display can be imperfect due to sun angle, boat trim and speed. A gimbal mounted display can be adjusted side to side to provide the most direct view for the operator and can be adj...
by Jefecinco
Fri Jan 07, 2022 10:26 am
Forum: The GAM
Topic: Trailer for 17 Outrage
Replies: 17
Views: 4899

Re: Trailer for 17 Outrage

You may also want to consider a Karavan trailer. I believe they are the stock galvanized trailer furnished with smaller Boston Whaler boats shipped to dealers with a trailer.
by Jefecinco
Thu Jan 06, 2022 9:51 am
Forum: The GAM
Topic: New Experimental Graphene Anti Foul
Replies: 4
Views: 2591

Re: New Experimental Graphene Anti Foul

I've had good performance from water-based ablative anti-fouling paint in the very warm waters of the Gulf of Mexico. Both West Marine and Interlux offered this type paint in very similar formulas. I applied three coats, with the first coat in a contrasting color to show when paint needed to be reap...
by Jefecinco
Thu Jan 06, 2022 9:45 am
Forum: The GAM
Topic: Montauk 17 with used E-TEC 115-HP
Replies: 8
Views: 3234

Re: Montauk 17 115 Etec

If you think a product you want to buy is overpriced make an offer. When buying an expensive product negotiation is often the way to pay less than the "asking" price. "Consumer Reports" magazine recommends negotiating the price for any high priced item be it new or used. If you t...
by Jefecinco
Mon Jan 03, 2022 10:38 am
Forum: REPAIRS and MODIFICATIONS
Topic: Rebuilding Gear Case of 48SPL-Part 1
Replies: 46
Views: 13288

Re: Rebuilding Gear Case of 48SPL

I assume you have tried all the spray products recommended for loosening stuck fasteners. PB Blaster has been more useful in my experience than several others. Having said that I was ultimately unsuccessful in removing the steering wheel from it's shaft on our Sport 13. When attempting to remove the...
by Jefecinco
Sat Jan 01, 2022 10:46 am
Forum: The GAM
Topic: Protect Deck from On-deck Fuel Tank
Replies: 5
Views: 2259

Re: Protect Deck from On-deck Fuel Tank

The underside of Dri-Dek is covered by dozens of small fingers which are relatively malleable. That distributes the load over multiple very small points on the boat's deck. I used it in our Sport 13 forward locker to prevent the galvanized anchor from damaging the fiberglass gel coat. I've also used...
by Jefecinco
Thu Dec 30, 2021 10:18 am
Forum: REPAIRS and MODIFICATIONS
Topic: Heating Skeg with a Torch to Bend
Replies: 19
Views: 5679

Re: Heating Skeg with a Torch to Bend

I'm not surprised you were able to straighten the skeg without heating it. I've had to do this twice and never had to use heat. The skeg on a previously owned Verado suffered the loss of a large chip on the leading edge. I was able to file the skeg to eliminate the chip and restore the approximate o...
by Jefecinco
Fri Dec 24, 2021 10:26 am
Forum: REPAIRS and MODIFICATIONS
Topic: 2019 Mercury 200-HP Instrumentation, Rigging Options
Replies: 2
Views: 1942

Re: 2019 Mercury 200-HP Instrumentation, Rigging Options

I recommend you contact David Wade Marine. His telephone number is 225-752-3789. He has been helpful with answers to questions on Mercury engines and their associated electronics.
by Jefecinco
Tue Dec 21, 2021 10:23 am
Forum: The GAM
Topic: New Experimental Graphene Anti Foul
Replies: 4
Views: 2591

Re: New Experimental Graphene Anti Foul

I believe there have been past attempts to produce biocide free bottom paints that depend upon an extremely slick bottom to keep marine growth from attaching itself to underwater surfaces. They enjoyed some success but recreational boats were not well suited to the products. I suspect the Graphene p...
by Jefecinco
Mon Dec 13, 2021 9:54 am
Forum: PERFORMANCE
Topic: SPORT 13 25-HP
Replies: 8
Views: 6921

Re: SPORT 13 25-HP

When I see the term "portable engine" I think of an engine with tiller steering and without power tilt of trim. I saw some that were advertised with remote mechanical controls, whatever that means. Perhaps the entire Yamaha lineup of 25 HP engines are considered portable although they weig...
by Jefecinco
Sat Dec 11, 2021 10:18 am
Forum: PERFORMANCE
Topic: SPORT 13 25-HP
Replies: 8
Views: 6921

Re: SPORT 13 25-HP

Our Sport 13 is powered by a Mercury 25 HP four stroke with electric tilt and trim with wheel steering. I feel the performance is more than sufficient but have never towed any water sport toys. The boat handles the weight of four well fed adults without problems. Never having operated a Sport 13 wit...