CONTINUOUSWAVE

Posted: **Mon Mar 27, 2023 1:49 pm**

Q1: What is the pin out of cable with ref 000-0120-62 at the Evinrude end?

: Fig. 1. An Evinrude cable with unknown signal and pin assignments.; navico-evinrude-engine-interface-cable-4.5-m-15-ft-and-t-con-510x510.png (217.52 KiB) Viewed 1215 times

Posted: **Mon Mar 27, 2023 5:08 pm**

The cable shown in Figure 1 is a NMEA-2000 drop cable for connecting the NMEA-2000 port on the legacy E-TEC engines to a NMEA-2000 network wired with the DeviceNet Micro connectors.

You can deduce the pin assignment at the E-TEC end from the wire colors in the mating connector. The wire insulation color code follows the standard NMEA-2000 color code.

For information on DeviceNet connectors see

https://continuouswave.com/forum/viewto ... =714#p4771

CONTINUOUSWAVE

Cable with ref 000-0120-62

Cable with ref 000-0120-62

Re: Cable with ref 000-0120-62