I have a Raymarine Axiom Pro receiving AIS data from an Icom M510 via NMEA 2000. The target data shows the ship icon, ship name, ship MMSI, but it also shows a long string of small black diamonds with a question mark in them. If I touch the diamond icon, a window appears with more data about target.
Q1; what is this black diamond chain?
Q2: how can I get rid of it?
RAYMARINE AXIOM Pro shows AIS Target as String of Diamonds
Re: RAYMARINE AXIOM Pro shows AIS Target as String of Diamonds
I presume your display presentation looks something like this:
The remedy for the display of AIS targets as a string of black diamonds on a RAYMARINE display is a firmware update.
Read more at
https://help.predictwind.com/en/article ... leshooting
Read under the subheading “My RayMarine Chartplotter displays AIS Target names with diamond question marks.”
Contact Raymarine customer support for further advice on resolving this problem. You may have to contact them via telephone, as it looks like their on-line support forum is now in read-only mode. For contact information visit
https://www.raymarine.com/en-us/about-raymarine/contact
- Fig. 1. AIS target with trail of back diamonds seen on RAYMARINE display.
- AIS_TargetDiamonds.jpg (4.07 KiB) Viewed 177 times
The remedy for the display of AIS targets as a string of black diamonds on a RAYMARINE display is a firmware update.
Read more at
https://help.predictwind.com/en/article ... leshooting
Read under the subheading “My RayMarine Chartplotter displays AIS Target names with diamond question marks.”
Contact Raymarine customer support for further advice on resolving this problem. You may have to contact them via telephone, as it looks like their on-line support forum is now in read-only mode. For contact information visit
https://www.raymarine.com/en-us/about-raymarine/contact