RAYMARINE AXIOM Pro shows AIS Target as String of Diamonds

VHF Marine Band radios, protocol, radio communication theory, practical advice; AIS; DSC; MMSI; EPIRB.
Cinders
Posts: 1
Joined: Wed Sep 18, 2024 7:16 am

RAYMARINE AXIOM Pro shows AIS Target as String of Diamonds

Postby Cinders » Wed Sep 18, 2024 7:31 am

I have a Raymarine Axiom Pro receiving AIS data from an Icom M510 via NMEA 2000. The target data shows the ship icon, ship name, ship MMSI, but it also shows a long string of small black diamonds with a question mark in them. If I touch the diamond icon, a window appears with more data about target.

Q1; what is this black diamond chain?

Q2: how can I get rid of it?

jimh
Posts: 12246
Joined: Fri Oct 09, 2015 12:25 pm
Location: Michigan, Lower Peninsula
Contact:

Re: RAYMARINE AXIOM Pro shows AIS Target as String of Diamonds

Postby jimh » Thu Sep 19, 2024 5:29 am

I presume your display presentation looks something like this:

AIS_TargetDiamonds.jpg
Fig. 1. AIS target with trail of back diamonds seen on RAYMARINE display.
AIS_TargetDiamonds.jpg (4.07 KiB) Viewed 176 times


The remedy for the display of AIS targets as a string of black diamonds on a RAYMARINE display is a firmware update.

Read more at

https://help.predictwind.com/en/article ... leshooting

Read under the subheading “My RayMarine Chartplotter displays AIS Target names with diamond question marks.”

Contact Raymarine customer support for further advice on resolving this problem. You may have to contact them via telephone, as it looks like their on-line support forum is now in read-only mode. For contact information visit

https://www.raymarine.com/en-us/about-raymarine/contact