Evinrude E-TEC Fall Promotion

A conversation among Whalers
jimh
Posts: 11670
Joined: Fri Oct 09, 2015 12:25 pm
Location: Michigan, Lower Peninsula
Contact:

Evinrude E-TEC Fall Promotion

Postby jimh » Sun Nov 15, 2015 5:22 am

There are just two weeks remaining to take advantage of Evinrude's Fall promotion for buyers of a new E-TEC engine. The sales incentive program ends November 29, 2015. It excludes the new 74-degree V6 E-TEC engines, also called the E-TEC G2, but applies to 75-HP to 300-HP E-TEC engines. The incentives are attractive. Buy a new E-TEC qualifying engine and choose one of three packages of rigging credits:

--FREE RIGGING with SystemCheck; includes the ignition switch and main harness, the oil tank (either 1.8 or 3-gallon); choice of SystemCheck RPM gauge from four styles; choice of remote throttle and shift controls from four styles; or tiller arm controls. This package has a value of $1,650 for single engine applications and $3,080 for dual engine applications.

--DISCOUNTED RIGGING with ICON Pro; includes the ignition switch and main harness, the oil tank (either 1.8 or 3-gallon); choice of remote throttle and shift controls from four styles; or tiller arm controls; ICON Pro RPM and Speedometer gauges; ICON Pro wiring; and GPS receiver. This package has a value of $2,530 for single engine applications and $3,960 for dual engine applications.

--DISCOUNTED RIGGING with ICON Pro gauges and ICON Electronic Shift and Throttle (EST); includes the oil tank (either 1.8 of 3-gallon; ICON controls; engine start-stop switch; engine cable; battery power cable; instrument gateway module; hubs and backbone cable; ICON Pro RPM and Speedometer gauges; and GPS receiver; This package has a value of $4,180 for single engine applications, $5,830 for dual engine applications, and $7,480 for triple engine applications.

Here is the fine print:

"Offer valid only to qualified buyers on purchases of engines bought for recreational use only. Excludes engines purchased under commercial, professional, and government programs. Offer is valid in the USA on new and unused Evinrude E-TEC 2008 and newer engines purchased, delivered and registered between 9/14/15 and 11/29/15 at an authorized, participating Evinrude dealer. Excludes Evinrude E-TEC G2 models. *FREE RIGGING: Consumer will receive the SystemCheck rigging package free of charge, but does not include labor costs. Does not include propeller. ICON Pro or ICON EST rigging packages may be chosen at a discount equal to the MSRP value of SystemCheck rigging package. The rigging discount (the value of MSRP for SystemCheck) will be applied directly to the consumer’s bill of sale on the purchase of a qualified new and unused, loose Evinrude E-TEC outboard engine 75 HP and above."

For more details see the promotional flyer from Evinrude.