CONTINUOUSWAVE

I just bought a 1970 13-footer--love it. The cockpit is classic blue with mahogany. The wood is decent, except for the bow hatch cover. It’s got a bubble on the surface of the wood. I might be able to sand it off and just take a layer off the top.

[Is there a source for a replacement bow hatch cover] for a c.1970 13-footer?

I don't know if that piece is available or not. I have a 1972 13' and that front hatch cover is plywood with mahagony veneer. If I was going to replace it I would go to a specialty hardwood dealer and buy solid mahogany or sapelle.

For advice on recommended vendors for replacement parts, see the article in the REFERENCE section:

Original Equipment Manufacturers and
Recommended Vendors
http://continuouswave.com/whaler/reference/OEM.html#wood

I suggest attempting to refinish the hatch you have now before investing in a replacement.

ASIDE: for advice on how to include images please see the INTRODUCTION forum and the article that describes how to post images:

Adding Image to Post
http://continuouswave.com/forum/viewtopic.php?f=1&t=2569

Please use the PREVIEW function to check the composition and appearance of your post.

Thanks y’all!