1996 GUARDIAN 22 INOX corner fittings

A conversation among Whalers
LMKP
Posts: 6
Joined: Mon May 09, 2022 5:52 am
Location: Italy

1996 GUARDIAN 22 INOX corner fittings

Postby LMKP » Mon May 09, 2022 6:00 am

I am looking for [a source to buy] two INOX [Stainless Steel] AISI [Grade] 316 L-corner [rub rail fittings] for my 1996 Guardian 22 (shown below).
Thank you for your attention. Thanks to whomever can help me. I am in Venice, Italy.

Corner_L.jpg
Fig. 1. "Corner L" Ruler dimensions in centimeters.
Corner_L.jpg (50.15 KiB) Viewed 623 times


Corner_W.jpg
Fig. 2. "Corner W" Ruler dimensions in centimeters.
Corner_W.jpg (41.36 KiB) Viewed 623 times
The Italian whaler

jimh
Posts: 11674
Joined: Fri Oct 09, 2015 12:25 pm
Location: Michigan, Lower Peninsula
Contact:

Re: 1996 GUARDIAN 22 INOX CORNERS

Postby jimh » Mon May 09, 2022 6:18 am

Contact Twin Cities Marine in Wisconsin. They can usually get almost any Boston Whaler OEM part. Their website is now at

https://www.beacontcm.com/contact/

User avatar
Phil T
Posts: 2602
Joined: Thu Oct 22, 2015 6:08 pm
Location: Was Maine. Temporarily Kentucky

Re: 1996 GUARDIAN 22 INOX CORNERS

Postby Phil T » Mon May 09, 2022 8:34 am

In reviewing the catalogs, those do not appear to be a Brunswick Commercial Products Division (BCPD) option, rather a custom fabrication made by BCPD or a local yard in Italy.

I think you will be more successful finding a metal fabricator in your local area.
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003

LMKP
Posts: 6
Joined: Mon May 09, 2022 5:52 am
Location: Italy

Re: 1996 GUARDIAN 22 INOX CORNERS

Postby LMKP » Mon May 09, 2022 8:56 am

Thank you so much Phil for your suggestion!
I will start to search it in here.
Have you all a nice day!
The Italian whaler