[Give me a source for a replacement through-hull drain tube] for a 2004 190 Nantucket.
I believe the other [through-hull drains on the boat were made by] Perko.
I am having no luck [finding a replacement drain tube].
Source for Anchor Locker Drain Replacement
-
- Posts: 95
- Joined: Thu Jun 13, 2019 11:10 am
Re: Source for Anchor Locker Drain Replacement
I ordered my 2004 Nantucket 190 through-hull fittings from Nauset Marine:
https://www.nausetmarine.com/
https://www.nausetmarine.com/
- Attachments
-
- 190-Nantucket-Thru-Hulls-Assembly-Parts-List-2004.pdf
- (48.66 KiB) Downloaded 238 times
-
- 190-Nantucket-Thru-Hulls-Assembly-2004.pdf
- (88.85 KiB) Downloaded 206 times
2004 Nantucket 190 w/ Mercury Optimax 135
Re: Source for Anchor Locker Drain Replacement
Very helpful information. Thank you.
Re: Source for Anchor Locker Drain Replacement
Called Nauset Marine and they were admirable. Got what I needed and some other parts and they are being shipped today. Thanks for the recommendation.
Re: Source for Anchor Locker Drain Replacement
I ordered mine through Sue Lodel but it is not yet installed.
If any of you would share your installation experiences; I would be most grateful.
If any of you would share your installation experiences; I would be most grateful.
Re: Source for Anchor Locker Drain Replacement
Mas -
My personal preference is to coat the entire tunnel in sealant or epoxy. Using a long art brush and a narrowed paint stir stick has worked for me. Once cured, dry fit tube. Apply painters tape around both flanges . Apply Boat Life on inside of flange and on the hull. Use a threaded rod with wide washers and nuts to ensure a good (tight but not too tight) fit. Remove rod and tape.
My personal preference is to coat the entire tunnel in sealant or epoxy. Using a long art brush and a narrowed paint stir stick has worked for me. Once cured, dry fit tube. Apply painters tape around both flanges . Apply Boat Life on inside of flange and on the hull. Use a threaded rod with wide washers and nuts to ensure a good (tight but not too tight) fit. Remove rod and tape.
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
Re: Source for Anchor Locker Drain Replacement
Thanks Phil!