CONTINUOUSWAVE

Please post a picture of the shock cord set up for the rod racks that shows how the cord attaches to the screw above the rod rack on a 2001 DAUNTLESS 16 or other model year or DAUNTLESS 18.

I bought Flameer-brand hinges with 150-degree-detent on eBay and Amazon for about $15 a pair. The Boston Whaler OEM hinges look similar and are four times more expensive. They [that is, the Boston Whaler hinges] may be better quality or they might be the exact same thing [as the Flameer-brand hinges sold on-line, or vice versa].

[Dead link]
Fig. 1. Some hinges, either the OEM hinges or the ones bought on-line

[Dead link]
Fig. 2. Some more hinges, photographed with very unusual lighting that makes it difficult to see anything clearly.

The "shock cords" were the first things I had to replace on our Dauntless 16. They were rubber with a hook on one end an an eye on the other. The hinges never needed replacement. I found the replacement cords at our local Bass Pro Shop for very small money.

I never found the side mount rod holders to be very useful. Reels protruded into the passage between the gunwales and the console which invited conflicts with legs.

Our solution was to buy some good quality stainless steel tubular rod holders and mount hem to the side rails on the inside side so as not to interfere with the boat cover. We installed four which were sufficient given the other four holders mounted to the front of the console. We bought West Marine branded holders on sale. They are on sale several times per year and when buying four may be worth a short wait.

I agree, I don't think I will ever use these but this hull is nicer than my last and the empty space of where the rod holders should have been bugged me.

I would not have put them back on if I had to pay $30 x 8 for all the original hinges.

My 2000 came with all hinges broken and all of the swing out part of the rod holders missing. My 2001 came with every hinge broken but the missing one stowed in the center console.

I have plenty of shock cord and small parts laying around from my kayak fishing. If was planning I could put the OEM look back to it with what I had laying around or for just a buck or two I would.

I have Scotty mounts on the rails. Also left over from my kayaks, and I just needed the rail adapters.

Flameer is the brand of the hinge. A search on eBay or Amazon with that name may locate a hinge like the ones seem in Figures 1and 2.

Figure 2 is a bad picture. It show two hinges. One with the screw covers on, one with the screw covers off.

[Revives a topic that has been dormant for six years. The illustrations provided in the initial post as Figures 1 and 2 have disappeared from the image hosting site used by the topic originator sometime between 2019 and 2025.]

The hinges on my 2000 Dauntless 16 are also broken

Q1: where can pictures of [suitable replacement] hinges [that are used on the under-gunwale folding rod holders] be found?

Q2: where can the specific [replacement Flameer-brand hinge alluded to in the prior discussion as be able to be found with a search on varioius websites] be purchased on Amazon or eBay?

ASIDE
I just joined the forum.

I'm a fellow 2001 Dauntless owner. I already put my boat away for the winter so I can't send pictures, but I'm happy to try and help.

I replaced some of the [stretch] cords and cracked rod racks [in 2025]. I found the parts available at [The Boat House] in Two Rivers, Wisconsin. I spoke to [Sue Lodel] who was very helpful.

[The cords and rod racks] weren't cheap, but they fit perfectly.

I really like the look of having solid black hinges now instead of bleached and cracked gray hinges.

--Mike

For advice on how to contact Sue Lodel who is now at THE BOAT HOUSE in Two Rivers, Wisconsin, see

Sue Lodel Contact Information
https://continuouswave.com/forum/viewto ... f=4&t=1551