Outrage 22 Cuddy Leak Repair

Repair or modification of Boston Whaler boats, their engines, trailers, and gear
gmw
Posts: 2
Joined: Wed Apr 07, 2021 1:36 pm

Outrage 22 Cuddy Leak Repair

Postby gmw » Wed Apr 07, 2021 1:46 pm

I have a 1992 OUTRAGE 22 Cuddy. I have restored the cuddy cushions, the wood, and the felt liner. To my dismay the seal between the foredeck and the cuddy is beginning to leak. Marine silicone caulk has been a short term fix butI really need to replace the rubber gasket the Cuddy sits on--here I am assuming the Cuddy sits on a gasket but not certain.

Give me guidance on repairing the leak.

Where can a new gasket be purchased?

Thanks

User avatar
Phil T
Posts: 2602
Joined: Thu Oct 22, 2015 6:08 pm
Location: Was Maine. Temporarily Kentucky

Re: Outrage 22 Cuddy Leak Repair

Postby Phil T » Wed Apr 07, 2021 2:19 pm

Glenn -

Review Don's comment in this identical thread:

http://continuouswave.com/ubb/Forum3/HTML/004007.html
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003

gmw
Posts: 2
Joined: Wed Apr 07, 2021 1:36 pm

Re: Cuddy Seal Replacement

Postby gmw » Wed Apr 07, 2021 2:40 pm

Thank you Phil.

[Addresses a participant in the discussion linked above that is 18-years-old.]

jimh
Posts: 11672
Joined: Fri Oct 09, 2015 12:25 pm
Location: Michigan, Lower Peninsula
Contact:

Re: Outrage 22 Cuddy Leak Repair

Postby jimh » Thu Apr 08, 2021 7:37 am

Posting a question or a request in this thread to someone who made a comment 18-years ago in another thread is not a particularly good way to get their attention. As it happens, the person you are addressing is still participating in the website. You should send him an email. His username is "Don McIntyre - MI".

However, I have no idea if that file mentioned 18-years ago is still around. From reading the 18-year-old thread, it sounded to me like there is no gasket or a replacement gasket. The method of repair was described in the 18-year-old thread.

User avatar
Phil T
Posts: 2602
Joined: Thu Oct 22, 2015 6:08 pm
Location: Was Maine. Temporarily Kentucky

Re: Outrage 22 Cuddy Leak Repair

Postby Phil T » Thu Apr 08, 2021 7:40 pm

I reached out to Don offline and he provided the factory instructions.

While it is a .pdf I saved it as a jpeg so it can be uploaded here.
Attachments
Cuddy leak repair.jpg
Cuddy leak repair.jpg (83.03 KiB) Viewed 2135 times
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003

User avatar
Phil T
Posts: 2602
Joined: Thu Oct 22, 2015 6:08 pm
Location: Was Maine. Temporarily Kentucky

Re: Outrage 22 Cuddy Leak Repair

Postby Phil T » Thu Apr 08, 2021 7:44 pm

This is page 2
Attachments
Screen Shot 2021-04-08 at 7.41.47 PM.jpeg
Screen Shot 2021-04-08 at 7.41.47 PM.jpeg (53.66 KiB) Viewed 2135 times
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003