Menemsha Refit
Posted: Tue Oct 12, 2021 6:57 am
Hello. I am a new member of the Boston Whaler family. I am the proud owner of a Menemsha.
She is rough looking but has a solid hull and a good engine. I began removing a couple of layers of pealing paint and will be replacing the woodwork over the long cold and dark Massachusetts winter.
She is missing the windshield. I will probably make a replacement as I think finding an original might be impossible.
I am interested in any advice as I begin this project.
I plan on installing a bimini and would like to have a canvas enclosure sewn also.
My research tells me that a "Navy" cover was an option. I( would like to have something similar, but with more headroom aft
Any advice or leads are greatly appreciated.
I am very, very excited about adventuring in this great little boat.
- Fig. 1. A MENEMSHA 16.
- 00a0a_hzQwUb5wYvRz_1320MM_1200x900.jpg (106.76 KiB) Viewed 2680 times
She is rough looking but has a solid hull and a good engine. I began removing a couple of layers of pealing paint and will be replacing the woodwork over the long cold and dark Massachusetts winter.
She is missing the windshield. I will probably make a replacement as I think finding an original might be impossible.
I am interested in any advice as I begin this project.
I plan on installing a bimini and would like to have a canvas enclosure sewn also.
My research tells me that a "Navy" cover was an option. I( would like to have something similar, but with more headroom aft
Any advice or leads are greatly appreciated.
I am very, very excited about adventuring in this great little boat.