Q1: where can replacement parts for the combined sidelight lamp for 2003 190 Nantucket (as shown below) be purchased?
Fig. 1. A combined sidelight lamp from a 2003 190 NANTUCKET
I want to buy a replacement lens. I cannot find a source of a replacement lens. I don't want to buy an entire new lamp assembly.
I can press the lens and twist it counter-clockwise; it will come off.
ASIDE: This lamp may have been used in other models, such as a 170 MONTAUK.
2003 190 NANTUCKET Navigation Lamp
Re: 2003 190 NANTUCKET Navigation Lamp
Contact Sue at Twin Cities Marine in Wisconsin to get advice on what replacement parts are available for the combined sidelights lamp at the bow of your 2003 190 NANTUCKET.
Re: 2003 190 NANTUCKET Navigation Lamp
I would remove the lens and polish it with a plastic polish (see link below).
I used the product linked below on my Outrage windshield and was really impressed.
Novis Kit - https://novuspolish.com/products/2-oz-plastic-polish-kit
I used the product linked below on my Outrage windshield and was really impressed.
Novis Kit - https://novuspolish.com/products/2-oz-plastic-polish-kit
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
Re: 2003 190 NANTUCKET Navigation Lamp
Thanks Phil.
The lens cap has a wire that broke off. I can try to repair [the break in the wire] with solder, but I usually make things worse when I attempt that type of repair.
The nice folks at Nauset marine were very helpful. They had the part on their website--but it has been discontinued.
https://www.nausetmarine.com/boston-whaler-parts/lighting-and-electrical/light-assemblies/1896374-bow-light-assembly/
They also told me that the part is made by Aqua Signal. I will call Aqua-Signal on Monday, June 27, 2022, to see if their lamp is still available. If the Aquat Signal lamp is not available, I will search online..
ASIDE: Thanks to Jim for starting this new thread.
The lens cap has a wire that broke off. I can try to repair [the break in the wire] with solder, but I usually make things worse when I attempt that type of repair.
The nice folks at Nauset marine were very helpful. They had the part on their website--but it has been discontinued.
https://www.nausetmarine.com/boston-whaler-parts/lighting-and-electrical/light-assemblies/1896374-bow-light-assembly/
They also told me that the part is made by Aqua Signal. I will call Aqua-Signal on Monday, June 27, 2022, to see if their lamp is still available. If the Aquat Signal lamp is not available, I will search online..
ASIDE: Thanks to Jim for starting this new thread.
Last edited by Masbama on Sun Jun 26, 2022 9:41 pm, edited 2 times in total.
Re: 2003 190 NANTUCKET Navigation Lamp
jimh wrote:Contact Sue at Twin Cities Marine in Wisconsin to get advice on what replacement parts are available for the combined sidelights lamp at the bow of your 2003 190 NANTUCKET.
I put in a call to Sue at Twin Cities Marine in Wisconsin on Friday, June 24, 2022, and left a voice message. I hope to talk to her tomorrow, Monday, June 27, 2022.
Re: 2003 190 NANTUCKET Navigation Lamp
Can the lamp assembly be separated from the chafe guard base? If so, consider replacing with a Perko combination light. You may need to drill and tap holes in chafe guard base.
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
Re: 2003 190 NANTUCKET Navigation Lamp
Phil, that’s a good idea.
Thanks!
Thanks!