Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  88-montauk parts needed

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   88-montauk parts needed
maleyann11 posted 10-07-2008 03:18 PM ET (US)   Profile for maleyann11   Send Email to maleyann11  
looking for front bow rails not pitted. front hatch,Ineed two broads,looking at the hatch cover,from left,the first two,the rest are in good shape,lover door,on the console need the lock,and close catch located on the fram work.Also looking for a padded cover or seat cushion with snaps to go up front over the hatch,thanks lyle
andygere posted 10-07-2008 06:56 PM ET (US)     Profile for andygere  Send Email to andygere     
I don't know what kind of web site you think this is, but I doubt you'll find 2 broads and a lover door here.
Henry posted 10-07-2008 10:34 PM ET (US)     Profile for Henry  Send Email to Henry     
I have the bow rails. Came from my 1988 Montauk 17. Very good condition. not pitted. They are complete except for the base for the bow stanchion. Send me an email address and I can send some pics. $350.00 plus shipping. Located in Miami.
nauticallumber posted 10-08-2008 10:46 PM ET (US)     Profile for nauticallumber  Send Email to nauticallumber     
I would be happy to quote your hatch & doors. Please contact me with measurments if you're interested.

Thanks for your consideration.

Mike Stennett
Nautical Lumber Co

maleyann11 posted 10-09-2008 09:15 AM ET (US)     Profile for maleyann11  Send Email to maleyann11     
Henry I've sent you a e-mail,thanks,also to mike,thanks again. Lyle
whalernj posted 10-09-2008 09:41 AM ET (US)     Profile for whalernj  Send Email to whalernj     
I just recieved my bench seats and hatch that Mike at Nautical Lumber made for me. I am very impressed with his work and prices. I would suggest you give him a call.
gamble posted 10-09-2008 02:35 PM ET (US)     Profile for gamble  Send Email to gamble     
Don't know why no one has acknowledged your comment, Andy. Very good!
Newtauk1 posted 10-09-2008 07:26 PM ET (US)     Profile for Newtauk1  Send Email to Newtauk1     
I have a side door available. The lock needs to be replaced. The frame is available as well. Feel free to email me and I will send you photos.
lizard posted 10-09-2008 09:37 PM ET (US)     Profile for lizard  Send Email to lizard     

That was the funniest thing I have seen you post and the line of the week.


maleyann11 posted 10-10-2008 09:28 AM ET (US)     Profile for maleyann11  Send Email to maleyann11     
I was hoping,I could get someone's attention,thanks too all,I'am still looking where to find the catch to hold the side door close on the console.By the way I'am typing with my left hand,I broke two fingers with my best hand thanks lyle
Newtauk1 posted 10-10-2008 07:14 PM ET (US)     Profile for Newtauk1  Send Email to Newtauk1     
Did you get the door? The door I have for sale has the frame the lock, the hinges and the catch.
maleyann11 posted 10-12-2008 11:26 AM ET (US)     Profile for maleyann11  Send Email to maleyann11     
thanks newtauk 1,I tried to e-mail you but came back,I found a console door /w/frame the catch was froze up,with a little bp blaster and new springs from a cheap allen set,the one that has a ring with springs that hold the allen wrenchs,cleaned up the ball bearings works find,thanks again lyle
nauticallumber posted 10-26-2008 09:05 AM ET (US)     Profile for nauticallumber  Send Email to nauticallumber     
I wouold be interested in your door. Im looking for one to duplicate. Please email me if its still available with a price.
Nautical Lumber co

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.