Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Waxing Textured Surfaces

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Waxing Textured Surfaces
Toad2001 posted 04-02-2001 11:29 AM ET (US)   Profile for Toad2001   Send Email to Toad2001  
Any tips on waxing the non skid sections of a BW hull? I wax by hand using rags for application usually. The wax gets into the criss-cross textured areas of the floor/deck, and its tough to buff the wax in/out.
triblet posted 04-02-2001 11:53 AM ET (US)     Profile for triblet  Send Email to triblet     
My advice is: don't.

You want a shiny surface on each little
facet? ;-)

Wash it and don't worry about it.

BTW: Remember "The Karate Kid": "wax on,
right, wax off, left"? Works great!


Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.