Moderated Discussion Areas
ContinuousWave: Whaler Repairs/Mods
water between the hulls
|Author||Topic: water between the hulls|
posted 04-05-2002 08:20 AM ET (US)
I have just purchased a 69 whaler. After drilling a couple of "test holes" it is clear that the foam between the hulls is wet. When I tipped the boat to drain the excess water there are only drops of water not the gallons that I expected. Shold I be concerned about the wet foam and if so any thoughts on resolving the issue. Thanks
posted 04-05-2002 08:33 AM ET (US)
Go to the general forum and look at the thread entitled Project:Chainsaw Whaler. There is a freat deal of information there.
posted 04-05-2002 05:51 PM ET (US)
JMG - Sounds like a Freudian slip...
"There is a freat deal of information there. "
Is "freat" a cross between "Fretful" and "Great"?
Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.