Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Mounting problems

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Mounting problems
shinchan posted 10-06-2002 10:01 PM ET (US)   Profile for shinchan   Send Email to shinchan  
Aloha! I'm trying to mount a davit and some side mount rod holders on a 15'Dauntless but I don't know how to proceed. I don't want to drill into the boat it self so I was thinking of fiberglassing a hardwood/thick plywood block to the inside and then screwing the mount into that with a stainless steel plate to spread the load. What do you think? The force on the holder/davit would be less than 100 lbs. Would that rip out the fiberglassed block? How do you mount items to your Whalers? I don't want to open any holes in the boat for fear of water intrusion. Would this work? Thanks in advance for any info/advice Shinchan
Dick posted 10-07-2002 09:51 PM ET (US)     Profile for Dick  Send Email to Dick     

I replied to some of your questions on another forum.
I'll e-mail the pictures from here as it doesn't work at the other site.

Dick posted 10-07-2002 09:57 PM ET (US)     Profile for Dick  Send Email to Dick     

The e-mail address you have listed doesn't work.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.