ICON Pro Gauge Installation Advice

Information about Evinrude I-Command, ICON Pro, and ICON Touch Color Displays
Posts: 78
Joined: Thu Oct 22, 2015 3:51 pm

ICON Pro Gauge Installation Advice

Postby ferdinando » Thu Feb 16, 2017 12:35 pm

I currently have a E-TEC 150, 2010 production-year, model E150DPXIS. As I've always been a fan of fuel meters, my current gauge just died, and has been discontinued. From what I have read the ICON Pro Gauge can give me fuel info and a bunch of other information.

What would I need besides the gauge to complete this installation?

Is it plug and play?

I would change out my current Evinrude analog tach and replace it with a ICON Pro 3.5 which would give me readouts on its digital display.

Any assistance is appreciated. Fred

Posts: 6019
Joined: Fri Oct 09, 2015 12:25 pm
Location: Michigan, Lower Peninsula

Re: Icon Pro Gauge Installation Advice

Postby jimh » Fri Feb 17, 2017 5:36 pm

ICON Pro gauges all work off the ICON Pro RPM gauge. The ICON Pro RPM gauge connects to a NMEA-2000 network to get data from the E-TEC engine. To use an ICON Pro RPM gauge you must have a NMEA-2000 network.

Evinrude ICON Pro gauges are described in detail in an article I wrote several years ago about them in the REFERENCE section. I strongly recommend reading this lengthy, detailed, illustrated article. It gives more information about Evinrude ICON Pro gauges than can be found anywhere else, as it covers the general product information, describes how they function, and shows in detail their installation. See

ICON Gauges for E-TEC
Modern Electronic Engine Instrumentation
by James W. Hebert


Construction of a NMEA-2000 network is described in detail in an an article I wrote several years ago in the REFERENCE section. See

NMEA-2000 Networks and Modern Outboard Engines
http://continuouswave.com/whaler/refere ... A2000.html