How can fogging and scratches in a BECKSON clear circular pry-out deck access plate be removed?
I tried Plastx by Meguiar's, but it doesn’t work on this material.
Thanks,
Don
BECKSON Clear Pry-out Deck Access Plate: Removing Fogging and Scratches
BECKSON Clear Pry-out Deck Access Plate: Removing Fogging and Scratches
1986 Outrage 18 with 2001 Honda 130 HP
Former Owner 1991 Guardian 19 with 1994 Evinrude V4 140HP
Former owner 1987 Montauk with 1998 Mercury 90HP
Nova Scotia
Former Owner 1991 Guardian 19 with 1994 Evinrude V4 140HP
Former owner 1987 Montauk with 1998 Mercury 90HP
Nova Scotia
Re: BECKSON Clear Pry-out Deck Access Plate: Removing Fogging and Scratches
The BECKSON clear pry-out deck access plates used typically to cover the fuel tank access point where the fuel tank level gauge is located can still be obtained from the OEM supplier for $38. That includes a new surround ring and the pry-out plate. I do not believe BECKSON sells just the clear pry-out plate.
See the article in the REFERENCE SECTION on the TOPIC of
Original Equipment Manufacturers and
Recommended Vendors
https://continuouswave.com/whaler/refer ... tml#pryout
See the article in the REFERENCE SECTION on the TOPIC of
Original Equipment Manufacturers and
Recommended Vendors
https://continuouswave.com/whaler/refer ... tml#pryout
Re: BECKSON Clear Pry-out Deck Access Plate: Removing Fogging and Scratches
Very good Jim, that is a great deal for $38 these days. Thanks, Don
1986 Outrage 18 with 2001 Honda 130 HP
Former Owner 1991 Guardian 19 with 1994 Evinrude V4 140HP
Former owner 1987 Montauk with 1998 Mercury 90HP
Nova Scotia
Former Owner 1991 Guardian 19 with 1994 Evinrude V4 140HP
Former owner 1987 Montauk with 1998 Mercury 90HP
Nova Scotia
Re: BECKSON Clear Pry-out Deck Access Plate: Removing Fogging and Scratches
Don - Consider wet sanding?
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
Re: BECKSON Clear Pry-out Deck Access Plate: Removing Fogging and Scratches
What’s the process Phil? Not experienced but can take a crack at it.
1986 Outrage 18 with 2001 Honda 130 HP
Former Owner 1991 Guardian 19 with 1994 Evinrude V4 140HP
Former owner 1987 Montauk with 1998 Mercury 90HP
Nova Scotia
Former Owner 1991 Guardian 19 with 1994 Evinrude V4 140HP
Former owner 1987 Montauk with 1998 Mercury 90HP
Nova Scotia
Re: BECKSON Clear Pry-out Deck Access Plate: Removing Fogging and Scratches
It is similar to woodworking.
Start with a grit and work finer. I would start at 1000 grit, then step up to 1500 and then finish at 2000.
Start with a grit and work finer. I would start at 1000 grit, then step up to 1500 and then finish at 2000.
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
Re: BECKSON Clear Pry-out Deck Access Plate: Removing Fogging and Scratches
Thanks Phil, I’ll give it a try.
1986 Outrage 18 with 2001 Honda 130 HP
Former Owner 1991 Guardian 19 with 1994 Evinrude V4 140HP
Former owner 1987 Montauk with 1998 Mercury 90HP
Nova Scotia
Former Owner 1991 Guardian 19 with 1994 Evinrude V4 140HP
Former owner 1987 Montauk with 1998 Mercury 90HP
Nova Scotia