Montauk 17 Railing Stanchion Support Backing Plates
-
- Posts: 8
- Joined: Tue Jul 30, 2019 4:24 pm
Montauk 17 Railing Stanchion Support Backing Plates
A Montauk 17 hull [is shown with a hidden railing] stanchion and a [visible exterior of hull backing plate].
[On the boat under discussion on the Starboard side the] lower-mount-top-support exterior is through-bolted .
[On the boat under discussion on the Port side there is something that] appears [to be different].
Is this the original design for c.1988?
Re: 17' Montauk bow rail question
The starboard side is original.
The only source for replacements that I am aware of is http://www.specialtymarine.com/BOSTON-WHALER-STAND-OFF-STANCHION-BACKING-PLATE-p153.html
I doubt they will match OEM so you may want to replace both and keep the original just in case.
The only source for replacements that I am aware of is http://www.specialtymarine.com/BOSTON-WHALER-STAND-OFF-STANCHION-BACKING-PLATE-p153.html
I doubt they will match OEM so you may want to replace both and keep the original just in case.
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
Re: Montauk 17 Railing Stanchion Support Backing Plates
PHIL--without your reply I would not have understood the initial question. Thanks for interpretation.
-
- Posts: 8
- Joined: Tue Jul 30, 2019 4:24 pm
Re: Montauk 17 Railing Stanchion Support Backing Plates
PHIL--Thank you. [A replacement backing plate for a MONTAUK 17 railing stanchion support was] exactly what I was after.