Bimini For Outrage 22' 1988

[fina]

Would a Wm. J. Mills & Co. Bimini from a 1997 Outrage 24' work on an Outrage 22' 1988?

[jimh]

I doubt a Bimini for another model would be an exact fit on a different model. You can contact the Wm. J. Mills & Co. of Greenport, New York and ask them, inasmuch as they made canvas for both boats.

The canvas from Mills for an OUTRAGE 22 was called a FLYING TOP (small) or SUN TOP (large). The FLYING TOP is part of a WEATHER PROTECTION SYSTEM:

• Flying Top
• Windshield
• Port Side Curtain
• Starboard Side Curtain
• Foward Shelter
• Aft drop curtain

The SUN TOP was not integrated with other weather canvas.

[biggiefl]

It will fit if the width is correct and the height is good for your needs. Biminis are rarely built for aa single hull as the bows can expand or contract a few inces in width to accommodate mounting spots. Your hull is 7.5' wide so you need roughly a 84" wide frame +/- a couple inches. Where are you located?

[Phil T]

Nick -

I recall Bill is out on "the island", probably within an hour of Mills.

[fina]

Yes, on Long Island

[fina]

I believe the Bimini for the 24' is about 8' 5"

[biggiefl]

Too wide, you can squeeze a couple few inches but not 18 or so.