SPORT 15 Hull and Transom Thickness
Posted: Fri Sep 02, 2022 1:07 pm
[This post was made in an older thread on a completely different topic. Please do not revive old threads and change their topic. The off-topic post has been separated into its own topic. If you want to start a new topic, use the NEW TOPIC button. The NEW TOPIC button is available at any index listing of a forum--Moderator]
Q1: what is the hull thickness of a SPORT 15?
Q2: what is the transom thickness of a SPORT 15?
BACKSTORY. I have a [unspecified] Boston [Whaler boat] that [I believe is] full of water under the deck. This is a recurring problem. [Instead of drilling holes and getting water inside [the hull]. I [plan] to install a centerline drain directly above the top of the interior of the hull. To do that the thickness of the hull must be known accurately.
Q1: what is the hull thickness of a SPORT 15?
Q2: what is the transom thickness of a SPORT 15?
BACKSTORY. I have a [unspecified] Boston [Whaler boat] that [I believe is] full of water under the deck. This is a recurring problem. [Instead of drilling holes and getting water inside [the hull]. I [plan] to install a centerline drain directly above the top of the interior of the hull. To do that the thickness of the hull must be known accurately.