I'm restoring a c.1965 MONTAUK 17. I am almost ready to apply graphics to the hull.
Q1: what is the proper length for the BOSTON WHAKER graphic on the hull
I want the factory specification.
I have seen graphics being sold on-line that vary in length from 10-inches long to 20-inches long.
ASIDE: this is my first post on this forum.
Graphic Size for a 17 Montauk
-
- Posts: 1
- Joined: Thu Mar 23, 2023 7:02 am
Graphic Size for a 17 Montauk
67 17 Montauk restoration
Re: Graphic Size for a 17 Montauk
The Montauk was not introduced until 1973.
If you have a wooden center console, it could be a Nauset, Sakonnet or other 16' model.
There is one source for OEM decals.
http://www.MagicBrushSigns.com
Give Janis a call and she'll get you the appropriate decals for your model.
If you have a wooden center console, it could be a Nauset, Sakonnet or other 16' model.
There is one source for OEM decals.
http://www.MagicBrushSigns.com
Give Janis a call and she'll get you the appropriate decals for your model.
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
Re: Graphic Size for a 17 Montauk
For help sourcing OEM parts or recommended vendors, see the article in the reference section at
https://continuouswave.com/whaler/reference/OEM.html
You should also browse the REFERENCE section at
https://continuouswave.com/whaler/reference/
And also read the FAQ at
https://continuouswave.com/whaler/reference/FAQ/
The 16-foot 7-inch hull was referred to as a “16” until c.1976, when it became the “17” hull. The reason for the change was to conform all the odd-number hulls as being a round bottom boat and all the even-numbered hulls to be a moderate v-bottom boat. For more on the numbering scheme see
Boston Whaler Hull Length--Part of Bob D's Plans
https://continuouswave.com/forum/viewto ... 637#p15041
Read more about this hull in the REFERENCE article about it at
https://continuouswave.com/whaler/reference/16-17/
https://continuouswave.com/whaler/reference/OEM.html
You should also browse the REFERENCE section at
https://continuouswave.com/whaler/reference/
And also read the FAQ at
https://continuouswave.com/whaler/reference/FAQ/
The 16-foot 7-inch hull was referred to as a “16” until c.1976, when it became the “17” hull. The reason for the change was to conform all the odd-number hulls as being a round bottom boat and all the even-numbered hulls to be a moderate v-bottom boat. For more on the numbering scheme see
Boston Whaler Hull Length--Part of Bob D's Plans
https://continuouswave.com/forum/viewto ... 637#p15041
Read more about this hull in the REFERENCE article about it at
https://continuouswave.com/whaler/reference/16-17/