To access the battery in a DAUNTLESS 15 is hard.
Give me a suggestion for creating a door or a removable access plate on the starboard side of the console of a DAUNTLESS 15.
Dauntless 15 Console Access
Re: Dauntless 15 Console Access
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
Re: Dauntless 15 Console Access
How much access is needed?
Perhaps a deck plate would provide sufficient access, and they don’t cost $750.
Compare at:
https://www.beckson.com/dckplt.html
Or perhaps a hatch:
https://www.beckson.com/hatches.html
Before you cut into the side of the console, make sure the side of the console is a flat surface. If the surface is not flat, making a nice opening will be more difficult than if it were a flat surface.
Perhaps a deck plate would provide sufficient access, and they don’t cost $750.
Compare at:
https://www.beckson.com/dckplt.html
Or perhaps a hatch:
https://www.beckson.com/hatches.html
Before you cut into the side of the console, make sure the side of the console is a flat surface. If the surface is not flat, making a nice opening will be more difficult than if it were a flat surface.