Trailer Hitch Drawbar with Height Adjustment and Scale

A conversation among Whalers
jimh
Posts: 13291
Joined: Fri Oct 09, 2015 12:25 pm
Location: Michigan, Lower Peninsula
Contact:

Trailer Hitch Drawbar with Height Adjustment and Scale

Postby jimh » Wed Aug 12, 2020 3:39 pm

Recently I noticed a vehicle with an unusual height-adjustable hitch drawbar assembly. There was no trailer attached so I could get some good pictures of it:

hitch1.jpg
Fig. 1. Weigh-Safe hitch.
hitch1.jpg (59.18 KiB) Viewed 1455 times


hitch2.jpg
Fig. 2 Weigh-Safe hitch showing tongue weight scale just visible on left side.
hitch2.jpg (43.11 KiB) Viewed 1455 times


I just spent an hour browsing the WEIGH-SAFE.COM website. They have many very innovative and interesting hitches and towing accessories at very reasonable prices:

https://www.weigh-safe.com/

There is a great deal of information on the website, and it would be pointless to try to summarize it here. It is a well designed website showing many innovative towing products.

Perhaps the most impressive was their demonstration video showing the effect of tongue weight on dynamic handling of a trailer and vehicle. See

https://youtu.be/w9Dgxe584Ss

jimh
Posts: 13291
Joined: Fri Oct 09, 2015 12:25 pm
Location: Michigan, Lower Peninsula
Contact:

Re: Trailer Hitch Drawbar with Height Adjustment and Scale

Postby jimh » Thu Aug 13, 2020 12:34 pm

After reading about the Weigh-Safe height-adjustable drawbar, their instructions specify that there must be 11-inches clearance to ground from the bottom of the vertical adjustment bar. I didn't measure the one illustrated above, but in the picture the vertical clearance looks like it might be just 11-inches, if that. The length of the vertical part of the drawbar can be changed when ordering. Customers are advised to take measurements of the height above ground for their vehicle's hitch tube when the vehicle is loaded with the trailer, and then order the drawbar with the appropriate vertical length.