Give me some help identifying an unusual 13-footer:
I have a 13-foot 4-inch hull that has no smirk. The engine splash well is the full width of the boat. The hull a concave deck.
This hull has an identification number, but the Manufactuerer Identication Code (MIC) is "WAZ" which indicates a Washington (state) home-built or unknown manufacturer.
BACKSTORY
[As already mentioned in a prior post] I am the Fleet Manager for a Youth Sailing Program on the Puget Sound. We run seven older Boston Whaler boats as our coach's boats. We configure them with center consoles and bass boat type single chairs for the coaches.
[Moderator's Note: THE GAM is a boating forum. Help with using the forum software cannot be discussed in a boating forum. Please visit the forum INTRODUCTION TO THE FORUM SOFTWARE and read the thread "Adding Image to Post". If you need more help, post a reply in that thread to get more help.
Identify Older 13-foot Hull, Possibly non-Boston Whaler
Re: Identify Older 13-foot Hull, Possibly non-Boston Whaler
So far in your brief description the boat sounds like just an early 13-footer. See the REFERENCE section article on the 13-foot hull for more details and model changes:olegreg wrote:I have a 13-foot 4-inch hull that has no smirk. The engine splash well is the full width of the boat. The hull a concave cockpit floor.
https://continuouswave.com/whaler/reference/13/
Q1: what is the transom height of your unknown hull?
Q2: what is the gel coat color of the cockpit deck and interior?
Q: what color is (was) the rub railing?
That is not any sort of definitive indication that the hull is not a Boston Whaler. Some prior owner may have tried to register the boat and did not have any paperwork or physical evidence that the hull was a Boston Whaler, so he just got a "home-made" HIN from the state.olegreg wrote:This hull has an identification number, but the Manufacturer Identification Code (MIC) is "WAZ" which indicates a Washington (state) home-built or unknown manufacturer.