MONTAUK 17 Tackle Center Installation

Repair or modification of Boston Whaler boats, their engines, trailers, and gear
Dick E
Posts: 10
Joined: Mon Aug 29, 2016 7:02 pm

MONTAUK 17 Tackle Center Installation

Postby Dick E » Wed Aug 31, 2016 7:10 pm

I have 1998 Montauk. While this is an older style, I believe the console is better built than the newer ones. While the Montauk has limited storage, I tried to maximize the storage area.

On the right side of the console, the fire extinguisher indent just holds the fire extinguisher, a small one at that. I have a bigger one in the console that quick to get to. I never need it in 20 years.

I did not want to “junk up” my Montauk with some cheap looking add on.

I looked at boatoutfitters.com; [the tackle center they sell] is made of marine Starboard with all stainless-steel hardware. I wanted it to fit in the fire extinguisher indent. I chose this model:

Tackle Storage Unit - 3 Drawer, 2 Tray

This model filled up the side nicely, but at the same time [has only] 12-inches of depth--which I wanted. The manufacturer offers custom cabinets of any size, but since they need to be engineered, they are costly. The standard stock items are the best value.

At first, I was concerned that I had too much [drawer] space but not enough box storage. The drawers are great and hold many lures, spoons, jigs, clippers, etc. I had to cut out the battery box slightly and moved the battery about four inches and [also moved] one wire. The cutout as per directions was fine. I used all SS hardware. As the fishing season approaches I try it out.

Tackle Storage photos Installed

jimh
Posts: 13285
Joined: Fri Oct 09, 2015 12:25 pm
Location: Michigan, Lower Peninsula
Contact:

Re: MONTAUK 17 Tackle Center Installation

Postby jimh » Sat Sep 03, 2016 9:16 am

The results are very good looking and seem very functional. Thanks for posting this interesting modification with excellent illustrations and links.