CONTINUOUSWAVE

I want to replace the deck plates and hatch on my 1994 Outrage 21

Give me a suggestion where to find replacements deck plates and replacement hatches.

Thanks—John Mac

Take some measurements of the outer ring diameter and the actual cutout of the deck cover.

https://beckson.com/prydp.html

Drill out the rivets, seal the edge with sealant and install the new deck plate.

Within the last three years, I ordered replacement circular deck pry-out access plates directly from Beckson in the original Desert Tan color.

I also found OEM replacement hatches.

These were for a 1990 boat.

See

Beckson deck access plates
viewtopic.php?f=6&t=2406

And

Pompanette Hatches
http://continuouswave.com/ubb/Forum3/HTML/017057.html

I have had good luck purchasing parts for my 2004 Boston Whaler Nantucket 190 from Nauset Marine:

https://www.nausetmarine.com/deck-plates/

Pretty sure the 1994 deck plates aren’t Beckson as they are not pry-out design. The 1994 has a toggle handle design in the deck plates. Definitely not Desert Tan but white hull with Pantone gray deck and interior in 1994 so the deck plates were white in color.

I looked back at my notes and found Viking Marine as the supplier of deck plates on the mid 90's Whalers. Not sure if they are still available or not.

Is this vendor a possible source?

http://www.foreandaftmarine.com/INSPECT ... VIKING.htm

Note all the items in Jim's link are either sold out or discontinued.