Trim Tab Installation on c.1985 OUTRAGE
Trim Tab Installation on c.1985 OUTRAGE
Without cutting a hole in the hull bottom and shoving [some material identified by an unknown acronym as “MGPW”] into a hollowed out section of foam, followed by replacement of the foam, and followed by repair of the hull laminate, how can trim tabs be installed on a c.1985 OUTRAGE [of unspecified model length—always mention the full model name with length]?
Re: Trim Tab Installation
For advice on trim tab installation read my article in the REFERENCE SECTION at
Trim Tab Installation
https://continuouswave.com/whaler/reference/trimTabs.html
The method you suggest is unknown to me.
The material you described as “MGPW” is unknown to me.
Trim Tab Installation
https://continuouswave.com/whaler/reference/trimTabs.html
The method you suggest is unknown to me.
The material you described as “MGPW” is unknown to me.