Q1: where can a wood locating diagram be found for a SPORT 11?
Q2: to help secure rail bases should I shape and glue wood to the hull surfaces and mount the rail bases to the wood?
BACKSTORY
I spent a summer overhauling my [SPORT 11] and learning a lot along the way. One mistake I made was using nutserts in the gunwales to mount the bow rail. I used them on the deck and in the topsides as well. Iknow it's only a matter of time before they rip out or water gets in.
I like the position of my rails and brightwork, but there is no wood behind the fiberglass.
SPORT 11 Wood Locating Diagram
Re: SPORT 11 Wood Locating Diagram
To find drawings from Boston Whaler refer to this article:RideOrDive45 wrote:Q1: where can a wood locating diagram be found for a SPORT 11?
https://continuouswave.com/forum/viewto ... f=4&t=9897
No.RideOrDive45 wrote: Q2: to help secure rail bases should I shape and glue wood to the hull surfaces and mount the rail bases to the wood?
To secure loose rail bases see:
https://continuouswave.com/whaler/reference/FAQ/#Q7