1994 OUTRAGE 21 Deck Plates and Hatches

[Outrage 21 Jmac]

I want to replace the deck plates and hatch on my 1994 Outrage 21

Give me a suggestion where to find replacements deck plates and replacement hatches.

Thanks—John Mac

[Phil T]

Take some measurements of the outer ring diameter and the actual cutout of the deck cover.

https://beckson.com/prydp.html

Drill out the rivets, seal the edge with sealant and install the new deck plate.

[jimh]

Within the last three years, I ordered replacement circular deck pry-out access plates directly from Beckson in the original Desert Tan color.

I also found OEM replacement hatches.

These were for a 1990 boat.

See

Beckson deck access plates
viewtopic.php?f=6&t=2406

And

Pompanette Hatches
http://continuouswave.com/ubb/Forum3/HTML/017057.html

[roundle1979]

I have had good luck purchasing parts for my 2004 Boston Whaler Nantucket 190 from Nauset Marine:

https://www.nausetmarine.com/deck-plates/

[JSK55]

Pretty sure the 1994 deck plates aren’t Beckson as they are not pry-out design. The 1994 has a toggle handle design in the deck plates. Definitely not Desert Tan but white hull with Pantone gray deck and interior in 1994 so the deck plates were white in color.

[JSK55]

I looked back at my notes and found Viking Marine as the supplier of deck plates on the mid 90's Whalers. Not sure if they are still available or not.

[jimh]

Is this vendor a possible source?

http://www.foreandaftmarine.com/INSPECT ... VIKING.htm

[Phil T]

Note all the items in Jim's link are either sold out or discontinued.