Sakonnet Console and Seat Plans
-
- Posts: 22
- Joined: Mon Aug 06, 2018 9:09 am
- Location: Seacoast New Hampshire
Sakonnet Console and Seat Plans
I am restoring my 1970 Katama. The fiberglass side console is in bad shape. I would like to build a mahogany center console and reversible pilot seat similar to the Sakonnet. I have found the diagrams for locating attachment points in the hull but can not find any plans for the console or seat. I am aware of the plans offered by Ward Grafton. I contacted Boston Whaler. They suggested I look on this form.
Re: Sakonnet Console and Seat Plans
All of the available drawings that are hosted here at continouswave are indexed at
http://continuouswave.com/whaler/reference/drawings.html
Once Boston Whaler got up to speed on e-mail and began to freely send out their old drawings, the need to collect them all and catalogue them here became less necessary, so that project stopped.
http://continuouswave.com/whaler/reference/drawings.html
Once Boston Whaler got up to speed on e-mail and began to freely send out their old drawings, the need to collect them all and catalogue them here became less necessary, so that project stopped.
Re: Sakonnet Console and Seat Plans
I have updated my website with the early 16-foot SAKONNET and NAUSET woodwork drawings that include the complete console, pilot seat, and front deck. My previous site had become inoperable recently.
[See follow-on post below for URL—jimh]
--Smirk
[See follow-on post below for URL—jimh]
--Smirk
Re: Sakonnet Console and Seat Plans
I have restored the previous Whaler Woodwork website for early 16-foot SAKONNET and NAUSET drawings at the following address. Please ignore the other address recently posted above.
https://arcshark3d.wixsite.com/olblue66
https://arcshark3d.wixsite.com/olblue66