Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   seat
eatfish posted 07-31-2001 05:37 PM ET (US)   Profile for eatfish   Send Email to eatfish  
I have a 67 nauset that I am updating a bit. Can a seat from a 1974 Montauk be mounted in this boat? Are the stringers in the same place? The holes in the new seat are 37'on the outside and 32' on the inside. Any advise? Thanks
Zack posted 07-31-2001 05:46 PM ET (US)     Profile for Zack  Send Email to Zack     
Look in the reference section under 16-17 Hulls and check the wood locating diagram.


Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.