Thanks to L H G; JimH - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  Thanks to L H G; JimH

search | FAQ | profile | register | author help

Author Topic:   Thanks to L H G; JimH

Buckda posted 04-08-2011 09:51 AM ET (US)
Just finished installing a bow pulpit which I built using drawings of the OEM design made available from LHG. Of course, I used a little creative license in the construction and final design, but I'm very thankful for the helpful nature of members of this site.
Without CW (thanks, JimH!), I'd probably be driving a different boat brand right now, and would not have had opportunity to learn and gain pleasure from countless restoration and modification projects. This site gives you the information that helps you generate the courage to attempt some of these projects.
Thanks again. While I still have a million things to do on the boat, the installation of the pulpit has generated that "light at the end of the tunnel" that I can look forward to when this year's projects are completed.

alfred posted 04-08-2011 09:54 AM ET (US)
Judging from the pictures, it looks like this project will turn out cherry!
Waterwonderland posted 04-08-2011 10:14 AM ET (US)
Congratulations on finishing your project.
So that leaves another 14 to go?

My thanks to Jim as well but there seems to be a correlation between the time I spend on this site and the money I spend on the boat. So if you don't hear from me anymore you will know that I ran out of money:)
L H G posted 04-08-2011 04:29 PM ET (US)
Dave - Where did you find my drawing of the Outrage 25 bow pulpit on CW. I can't find it.
Buckda posted 04-08-2011 04:32 PM ET (US)
Larry -
You sent them directly to me a long time ago...but I just got around to using them.
Dave
jimh posted 04-08-2011 08:33 PM ET (US)
Larry--If you like, send your drawing to me and I will post it.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Thanks to L H G; JimH
Buckda	posted 04-08-2011 09:51 AM ET (US) Just finished installing a bow pulpit which I built using drawings of the OEM design made available from LHG. Of course, I used a little creative license in the construction and final design, but I'm very thankful for the helpful nature of members of this site. Without CW (thanks, JimH!), I'd probably be driving a different boat brand right now, and would not have had opportunity to learn and gain pleasure from countless restoration and modification projects. This site gives you the information that helps you generate the courage to attempt some of these projects. Thanks again. While I still have a million things to do on the boat, the installation of the pulpit has generated that "light at the end of the tunnel" that I can look forward to when this year's projects are completed.
alfred	posted 04-08-2011 09:54 AM ET (US) Judging from the pictures, it looks like this project will turn out cherry!
Waterwonderland	posted 04-08-2011 10:14 AM ET (US) Congratulations on finishing your project. So that leaves another 14 to go? My thanks to Jim as well but there seems to be a correlation between the time I spend on this site and the money I spend on the boat. So if you don't hear from me anymore you will know that I ran out of money:)
L H G	posted 04-08-2011 04:29 PM ET (US) Dave - Where did you find my drawing of the Outrage 25 bow pulpit on CW. I can't find it.
Buckda	posted 04-08-2011 04:32 PM ET (US) Larry - You sent them directly to me a long time ago...but I just got around to using them. Dave
jimh	posted 04-08-2011 08:33 PM ET (US) Larry--If you like, send your drawing to me and I will post it.