posted 09-23-2013 06:27 AM ET (US) Can anyone recommend a surveyor in SW Florida that knows Whalers? Thanks Mike
Russ 13
posted 09-23-2013 01:02 PM ET (US)
Yes, Me. What is your question?? Russ
myakka
posted 09-24-2013 07:25 AM ET (US)
May I contact you offline?
contender
posted 09-24-2013 11:48 AM ET (US)
Where in south Fla exactly
Russ 13
posted 09-24-2013 01:34 PM ET (US)
Sure, send me an E-mail... or your phone #. Russ
myakka
posted 09-24-2013 08:43 PM ET (US)
The boat is in Ft Myers.
myakka
posted 09-24-2013 08:44 PM ET (US)
E-mail sent
Russ 13
posted 09-29-2013 09:55 AM ET (US)
Well I quoted $12.00 per foot on a survey, for a fellow C/W member & no reply. Guess I should have quoted my regular fee of $15 per. foot.
myakka
posted 10-04-2013 08:02 PM ET (US)
Russ I have replied multiple times by e-mail with no reply. If it is my fault so be it. I have an e-mail from the 26th of Sept. and another from the 29th. Both came in on the 29th. I replied to both your e-mails immediately. In fact I called you earlier this afternoon. No hard feelings but its not from lack of trying on my part. Mike
myakka
posted 10-04-2013 08:53 PM ET (US)
Here is my reply from the 29th.
Russ Your e-mails both came through today. I am still interested in having you look at the boat. Your prices are more than fair. I refrained from setting up a day to have the boat pulled because I hadn’t heard back from you. I didn’t think you where interested. I didn’t know it was an e-mail problem. The boat is in a slip. I will arrange to have it pulled when I talk to the owner. Thanks for the reply. Mike
myakka
posted 10-05-2013 10:24 PM ET (US)
Just a word of advice...sometimes e-mail doesn't cut it. A phone call between us worked it all out. Mike
myakka
posted 10-11-2013 06:41 PM ET (US)
Thank you Russ for the professional an courteous survey. Mike
Russ 13
posted 10-12-2013 09:48 PM ET (US)
Hi Mike, Thank you! It was nice working for you. Glad to hear you scored a good price on the Whaler. I think it will be a great boat for you. The compound I use to remove oxidation is: 3M Super Duty Rubbing Compound ...#05954 It works great with a low speed buffer. Then I apply a light glaze that removes any swirl marks. And finish with a good Maguire's cleaner wax. If you have any questions, give me a call. Russ
myakka
posted 10-15-2013 03:33 PM ET (US)
Great info. Thanks again Russ.