Wm. J. Mills & Co. Covers for Console, RPS - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  Wm. J. Mills & Co. Covers for Console, RPS

search | FAQ | profile | register | author help

Author Topic:   Wm. J. Mills & Co. Covers for Console, RPS

wurzig posted 10-10-2013 03:06 PM ET (US)
[Seeks images of Wm. J. Mills & Co. center console cover and reversible pilot seat cover] for a a 1993 Montauk 17. It would be great to see them. Thanks to anyone who might have some to share.
andygere posted 10-10-2013 04:57 PM ET (US)
Are you looking for info on the combined cover or the individual covers?
wurzig posted 10-11-2013 12:03 PM ET (US)
[I] am thinking in the direction of individual covers but am open to either route. [T]hanks[.]
jimh posted 10-11-2013 12:34 PM ET (US)
I suspect that if you contact the Wm. J. Mills & Co. they could email you some images of their products.
wurzig posted 10-15-2013 01:53 PM ET (US)
[I] checked with [S]uzanne at [Wm. J. Mills & Co.], and they do not have any photos or diagrams available [that show a console cover or a reversible pilot seat cover for a 1993 Boston Whaler MONTAUK 17]. [I] was surprised by this.
PeteB88 posted 10-20-2013 04:31 PM ET (US)
Are you looking for pattern for your cover, to copy a Mills cover or for custom cover?
I had a super nice console/RPS cover made for my 95 Outrage 17 by a local Amish (legit) canvas shop and they did a terrific job, I love it. It is one piece, from cooler to RPS. It has a zipper door to access console from port side of the boat and a zipper in the back, midline that zips down from top of RPS to bottom of cover. Snaps along bottom secure it and they did a great job reinforcing certain high wear areas. (Miller's Canvas, Holton, Michigan = Andy)
I can send you photos of my console cover if you'd like. If Mills made it I'd expect cost close to a thou for sure. No disrespect to Mills, I'd buy their stuff and own lots of it - just super spendy and not local. For instance, Suzanne told me they do not have patterns for mooring cover for my Outrage 17 and I'd have to tow to NY to have one made.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Wm. J. Mills & Co. Covers for Console, RPS
wurzig	posted 10-10-2013 03:06 PM ET (US) [Seeks images of Wm. J. Mills & Co. center console cover and reversible pilot seat cover] for a a 1993 Montauk 17. It would be great to see them. Thanks to anyone who might have some to share.
andygere	posted 10-10-2013 04:57 PM ET (US) Are you looking for info on the combined cover or the individual covers?
wurzig	posted 10-11-2013 12:03 PM ET (US) [I] am thinking in the direction of individual covers but am open to either route. [T]hanks[.]
jimh	posted 10-11-2013 12:34 PM ET (US) I suspect that if you contact the Wm. J. Mills & Co. they could email you some images of their products.
wurzig	posted 10-15-2013 01:53 PM ET (US) [I] checked with [S]uzanne at [Wm. J. Mills & Co.], and they do not have any photos or diagrams available [that show a console cover or a reversible pilot seat cover for a 1993 Boston Whaler MONTAUK 17]. [I] was surprised by this.
PeteB88	posted 10-20-2013 04:31 PM ET (US) Are you looking for pattern for your cover, to copy a Mills cover or for custom cover? I had a super nice console/RPS cover made for my 95 Outrage 17 by a local Amish (legit) canvas shop and they did a terrific job, I love it. It is one piece, from cooler to RPS. It has a zipper door to access console from port side of the boat and a zipper in the back, midline that zips down from top of RPS to bottom of cover. Snaps along bottom secure it and they did a great job reinforcing certain high wear areas. (Miller's Canvas, Holton, Michigan = Andy) I can send you photos of my console cover if you'd like. If Mills made it I'd expect cost close to a thou for sure. No disrespect to Mills, I'd buy their stuff and own lots of it - just super spendy and not local. For instance, Suzanne told me they do not have patterns for mooring cover for my Outrage 17 and I'd have to tow to NY to have one made.