Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  1984 13 Standard Rejuvenation

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   1984 13 Standard Rejuvenation
Jholmes105 posted 10-04-2014 06:45 AM ET (US)   Profile for Jholmes105   Send Email to Jholmes105  
After a five year spell of no Whalers in the family, an Outrage ended up resparking my love of Whalers! I spent some time cleaning up the Outrage this summer and had some great times using it with the family. I then happened across a little 1984 13-foot Standard that had been sitting unused for many years and needed a little TLC.

The previous owner had added a slew of fishing accessories, which in my opinion detract from the clean beauty of a whaler. So after a good bath, pulling all accessories, wood, cables, and wiring it was ready for a full detail. The wood got a good sanding and many coats of varnish to bring back its beauty, while the hull got a full treatment and complement of 3M marine products. It is all buttoned back up and turned out great! A nice dark gray TaylorMade full cover topped it all off. Once the motor is freshened up she will be ready for the water next spring! My son had a great time helping out!

Stripping Down-
http://i19.photobucket.com/albums/b162/jhomes/imagejpg3_zps30a05ecf.jpg

All interior pulled and fully detailed-
http://i19.photobucket.com/albums/b162/jhomes/imagejpg1_zpsfab4672e.jpg

Sanding, sanding, sanding...Glad the Standard has the least amount of interior wood :)
http://i19.photobucket.com/albums/b162/jhomes/imagejpg2_zps9855d5d8.jpg

Hull came out great!
http://i19.photobucket.com/albums/b162/jhomes/imagejpg1_zps2566317d.jpg

Interior replaced and refitted-
http://i19.photobucket.com/albums/b162/jhomes/imagejpg4_zps23ce4a23.jpg
http://i19.photobucket.com/albums/b162/jhomes/imagejpg5_zpsb7f26d2f.jpg
http://i19.photobucket.com/albums/b162/jhomes/imagejpg4_zps33190005.jpg

JP


jimh posted 10-04-2014 07:42 AM ET (US)     Profile for jimh  Send Email to jimh     
The images show some very nice work. What process did you use to restore the luster to the gel coat finish? Which 3M products were used?
macfam posted 10-04-2014 08:13 AM ET (US)     Profile for macfam  Send Email to macfam     
Very nice!
Jeff posted 10-04-2014 11:18 PM ET (US)     Profile for Jeff  Send Email to Jeff     
She looks great Jeff!

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.