Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  Last Weeks of E-TEC Promotion

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Last Weeks of E-TEC Promotion
jimh posted 03-11-2015 07:02 PM ET (US)   Profile for jimh   Send Email to jimh  
The Evinrude promotion offer on the purchase of new E-TEC engines ends in a few weeks. The promotion has been running since December 15, 2014 and will end on March 31, 2015. Details are found at

http://www.evinrude.com/Content/Pdf/en-US/promotions/freshwater/ brp_boat15_uff_tear.pdf#zoom=100

The promotion has the following restrictions:

--Offer valid only to qualified buyers on purchases of engines bought for recreational use only.

--Excludes engines purchased under commercial, professional and government programs.

--Offer is valid in the USA on new and unused Evinrude E-TEC 2008 and newer engines purchased, delivered and registered between 12/15/14 and 3/31/15 at an authorized, participating Evinrude dealer.

--Excludes Evinrude® E-TEC® G2™ models.

The promotion offers both of the following incentives:

--7-YEAR WARRANTY OFFER: Subject to exclusions, limitations of liabilities, and all other terms and conditions of BRP’s standard limited warranty and B.E.S.T. contract, including without limitation the exclusions of damages caused by abuse, abnormal use or neglect (see B.E.S.T. contract for specific details of coverage and exclusions). Offer effective on all new and unused 15 H.O. and above Evinrude outboard engines. Eligible models will receive 7 years coverage (3 years of BRP Limited Warranty and 4 years of BRP Extended Service Terms (B.E.S.T.) subject to a $50 deductible on each repair. Benefit offered to Florida Residents is a 7-year BRP Limited Warranty. Evinrude portable engines (3.5 HP–15 HP) are eligible for a 5-year warranty. All rigging components purchased on the same bill of sale as the engine, will be covered under the same B.E.S.T. Warranty terms as the engine.

--and, FREE RIGGING: Consumer will receive the SystemCheck rigging package free of charge, but does not include labor costs. Does not include propeller. ICON Pro or ICON EST rigging packages may be chosen at a discount equal to the MSRP value of SystemCheck rigging package. The rigging discount (the value of MSRP for SystemCheck) will be applied directly to the consumer’s bill of sale on the purchase of a qualified new and unused, loose Evinrude E-TEC outboard engine 75 HP and above.

The following applies to either option:

Offer subject to change without notice. See your authorized, qualified Evinrude dealer for details. Terms and conditions apply. Offer may not be assigned, traded, sold or combined with any other offer unless expressly stated herein. OFFER VOID WHERE RESTRICTED OR OTHERWISE PROHIBITED BY LAW.

The FREE RIGGING offer is explained in more detail on the linked literature (see hyperlink above), and varies with the horsepower of the engine, number of engines, and type of rigging desired. The rigging incentive varies in value from $1,500 at a minimum to as much as $6,800 at a maximum.

The rigging packages are in three tiers:

--SYSTEM CHECK

--ICON PRO GAUGE

--ICON EST (Electronic Shift and Throttle)

This is quite an incentive and it would be a shame for someone planning on buying a new E-TEC outboard engine to miss this offer.

Whaler_bob posted 03-13-2015 12:38 PM ET (US)     Profile for Whaler_bob    
In the case of my new E-TEC 135 H.O., if you want to upgrade from the included free System Check rigging to the ICON PRO rigging it's an additional $450.
elvis posted 03-14-2015 05:28 AM ET (US)     Profile for elvis  Send Email to elvis     
This E-TEC promotion turned out to be a great deal for me. I bought a new 150 H.O. for my Guardian 18 from a fabulous dealer in Orangeburg, South Carolina The promotion saved me [money, money, money]. I recommend that anyone looking to buy new should seriously consider this promotion. I water-tested the engine for the first time last Sunday, and could not be more pleased. This new E-TEC line is awesome technology.
Whaler_bob posted 03-14-2015 07:45 AM ET (US)     Profile for Whaler_bob    
Yeah, the promotion--which ends March 31, 2015--is excellent. I added up the BPR list prices for the items included in the ICON PRO package and it came to about $2,200. I'm getting that package for $450 with the promo deal. If I went with the analog System Check hardware it would have cost nothing.

New E-TEC engines come from the factory with the propeller hardware, steering bar and battery cable. You need to purchase the main wiring harness, ignition switch kit, oil tank, controls and any gauges, and a propeller. With that in mind, the current promotion is an excellent deal, and the 7 year warranty is nothing to sneeze at, either.

jimh posted 03-15-2015 09:14 AM ET (US)     Profile for jimh  Send Email to jimh     
You must take delivery before March 31, 2015, as well as register the engine by then, so the time to act is now.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.